Calgary Jeep Association

« previous next »
Pages: [1] 2   Go Down

Author Topic: How are the unibody XJ's hold up?  (Read 3407 times)

0 Members and 1 Guest are viewing this topic.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
How are the unibody XJ's hold up?
« on: October 29, 2014, 01:44:34 PM »
Not very good would be my guess...


Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: How are the unibody XJ's hold up?
« Reply #1 on: October 29, 2014, 03:34:43 PM »
Looks to be doing pretty well for an XJ.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: How are the unibody XJ's hold up?
« Reply #2 on: October 29, 2014, 04:22:13 PM »
At first I thought is was the way XJ guys do wheelbase stretches but if you closely, it appears there are stress cracks around the hatch hinge area.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline ngrover

  • Stocker
  • Posts: 11
    • Xpedition XJ-Eh!
Re: How are the unibody XJ's hold up?
« Reply #3 on: October 29, 2014, 04:51:59 PM »
Haha.

They're holding up great!


I'm surprised he didn't rip his front axle off first.
Logged

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: How are the unibody XJ's hold up?
« Reply #4 on: October 29, 2014, 05:10:24 PM »
I am failing to see how this happened....something must have yanked on the rear axle for it to get that far away from the rig, whilst holding onto the front axle. I call foul play and stand strong with my XJ's!!  ;D
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: How are the unibody XJ's hold up?
« Reply #5 on: October 29, 2014, 05:44:19 PM »
Quote from: ngrover on October 29, 2014, 04:51:59 PM
Haha.

They're holding up great!


I'm surprised he didn't rip his front axle off first.

Anything will survive in the air where there's no stress, it's the landings thats killer ;D
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: How are the unibody XJ's hold up?
« Reply #6 on: October 29, 2014, 05:46:03 PM »
Quote from: dubbleJs on October 29, 2014, 05:10:24 PM
I am failing to see how this happened....something must have yanked on the rear axle for it to get that far away from the rig, whilst holding onto the front axle. I call foul play and stand strong with my XJ's!!  ;D

Probably high centred and an over-eager driver gave him a good tug backwards.
I doubt it happened just going over that particular obstacle.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline JENSSEN

  • Talks waaay too much!
  • Posts: 1606
    • Racing For The Cure
Re: How are the unibody XJ's hold up?
« Reply #7 on: October 29, 2014, 06:48:07 PM »
They do ok,..



« Last Edit: October 29, 2014, 06:55:53 PM by JENSSEN »
Logged
www.racingforthecure.ca


Definition of Link to this definition of Blasphemy
1. [n] blasphemous behavior; the act of depriving something of its sacred character;

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: How are the unibody XJ's hold up?
« Reply #8 on: October 29, 2014, 08:29:56 PM »
Quote from: Vinman on October 29, 2014, 01:44:34 PM
Not very good would be my guess...




To get the full benefit of an Xj it has to be red...;)
Logged
YJ=Y’all Jealous

Offline GiS

  • That CB Yapper
  • Posts: 641
Re: How are the unibody XJ's hold up?
« Reply #9 on: October 30, 2014, 12:43:46 PM »
Thankfully dude planned ahead and appears to be running 9 foot brakelines!
Logged

Offline Spinalguy

  • Talks waaay too much!
  • Posts: 2759
    • http://www.spinalguy.com
Re: How are the unibody XJ's hold up?
« Reply #10 on: October 30, 2014, 06:14:06 PM »
Quote from: GiS on October 30, 2014, 12:43:46 PM
Thankfully dude planned ahead and appears to be running 9 foot brakelines!
that is funny
Logged
sent from my old school rotary dial phone.

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: How are the unibody XJ's hold up?
« Reply #11 on: October 30, 2014, 06:23:22 PM »
Quote from: GiS on October 30, 2014, 12:43:46 PM
Thankfully dude planned ahead and appears to be running 9 foot brakelines!

Too bad he forgot the long travel slip joint in the driveshaft.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: How are the unibody XJ's hold up?
« Reply #12 on: October 30, 2014, 07:04:39 PM »
At least the rear quarter windows are ok. Those things are a bear to replace.
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline DGenR8

  • Budget Lift
  • Posts: 235
Re: How are the unibody XJ's hold up?
« Reply #13 on: October 31, 2014, 12:21:29 PM »
A little JB Weld and Duck tape, it'll be back on the trail in no time.
Logged
_/l ,['''`'''],
l---L--OllllllO-
()_)-()_)-o-)_)

81 CJ7

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: How are the unibody XJ's hold up?
« Reply #14 on: October 31, 2014, 04:49:59 PM »
You've been hanging around Johnny too much.
Logged
Quote from: w squared on October 26, 2010, 10:44:27 AM
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!
Pages: [1] 2   Go Up
« previous next »