Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Cherokee 4.0 oil filter adapter  (Read 1624 times)

0 Members and 1 Guest are viewing this topic.

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Cherokee 4.0 oil filter adapter
« on: April 10, 2016, 11:39:19 AM »
Have any of you guys removed or repaired the oil filter adapter on a 4.0 in a '90's Cherokee?
The centre bolt is being a biotch, and there is a good oil leak from the block to adapter O-ring.
Any tips or tricks?
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: Cherokee 4.0 oil filter adapter
« Reply #1 on: April 10, 2016, 12:47:16 PM »
Probably easier to pull the entire motor and replace it with a 4bt.
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Cherokee 4.0 oil filter adapter
« Reply #2 on: April 10, 2016, 01:34:34 PM »
Changed mine. Bolt was like  locktight in. Bigger snipe bar.
Logged

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Cherokee 4.0 oil filter adapter
« Reply #3 on: April 10, 2016, 05:09:24 PM »
Quote from: TL-Iguana on April 10, 2016, 12:47:16 PM
Probably easier to pull the entire motor and replace it with a 4bt.
I only have 1 of those, and it's being used right now  ;D
« Last Edit: April 10, 2016, 05:39:46 PM by Fredduck »
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's
Pages: [1]   Go Up
« previous next »