Calgary Jeep Association

Author Topic: Clanking noise when powering from reverse to forward  (Read 1237 times)

0 Members and 1 Guest are viewing this topic.

Offline slanktapper

  • UberWheeler
  • Posts: 477
  • Rob
Clanking noise when powering from reverse to forward
« on: March 22, 2018, 09:56:02 AM »
https://streamable.com/zb4t8 First 5 seconds you can here it.

So her I'm in reverse I'm on the gas and then it goes clunk.

Shift to forward on the gas and it goes clunk. I don't hear it on the road.  I'll get under it tonight and start looking, any suggestions on where I should start my search?
Tall Rob

Sold: Silver 06 Rubicon - 35"
Current: 92hp True selectable 4x4, Spooled rear diff, Electric front locker, 30" Mud Tires, Snorkel. Warn Axon 35s.

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: Clanking noise when powering from reverse to forward
« Reply #1 on: March 22, 2018, 10:39:09 AM »
Possibly a chain hitting something?
If not, I'd start with UJoints.
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline slanktapper

  • UberWheeler
  • Posts: 477
  • Rob
Re: Clanking noise when powering from reverse to forward
« Reply #2 on: March 22, 2018, 10:50:04 AM »
> Possibly a chain hitting something?

It feels like it's coming from the center of the jeep and not the rear... I'll keep this in mind

> Ujoints

Yeah not a difficult fix so that would be the best case
Tall Rob

Sold: Silver 06 Rubicon - 35"
Current: 92hp True selectable 4x4, Spooled rear diff, Electric front locker, 30" Mud Tires, Snorkel. Warn Axon 35s.

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Clanking noise when powering from reverse to forward
« Reply #3 on: March 22, 2018, 11:43:09 AM »
Sounds like ujoints
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers