Calgary Jeep Association

Author Topic: 2008 JKU V6 and 6 Speed  (Read 741 times)

0 Members and 1 Guest are viewing this topic.

Offline Sixty4X4

  • CJA Members
  • Baby Wheeler
  • Posts: 82
2008 JKU V6 and 6 Speed
« on: April 09, 2019, 07:39:32 PM »
3.8 V6 and 6 speed manual from 2008 JKU Rubicon. Runs perfect and only drops 1/2 later of oil in 6000kms changes. Does not leak oil and starts insanely at -30C. Installing a Gen V Chev and 8 speed auto so not required. This engine can be used with a stand alone controller such as Edelbrock or similar. Clutch is fine. Some of you have seen my Jeep on the trails. Complete with Alternator, PS pump and AC compressor as well.
$1200 for all.
Barry 403-763-7168
2008 JKU Ruby, Jeep steel bumper, 9500 winch, 2016 5.3 Chev LT & 8L90 8 spd auto, 285 Maxxis Bighorns, MC 2.5" and LC Arms.

Offline Sixty4X4

  • CJA Members
  • Baby Wheeler
  • Posts: 82
Re: 2008 JKU V6 and 6 Speed
« Reply #1 on: June 22, 2019, 08:45:30 PM »
Engine sold. Gearbox and flywheel available. $500.
2008 JKU Ruby, Jeep steel bumper, 9500 winch, 2016 5.3 Chev LT & 8L90 8 spd auto, 285 Maxxis Bighorns, MC 2.5" and LC Arms.