Calgary Jeep Association

Author Topic: 2013 JK Oil Pressure  (Read 44 times)

0 Members and 1 Guest are viewing this topic.

Offline GoChris

  • CJA Members
  • Baby Wheeler
  • Posts: 68
2013 JK Oil Pressure
« on: October 15, 2020, 05:18:19 PM »
So I bought one of these, and it does indeed have an option for oil pressure when I hook it up, but I don't get a value sadly. https://www.amazon.ca/gp/product/B00YG8N2UC

From what I can find online, 2013+ has the oil pressure sender and supplied via the PCM via OBD. Does anyone know more, do all 2013s have it, or how I can find out? I'll double check for codes that might indicate the sensor is broken but otherwise not sure. Looking for an easy way to get an oil pressure gauge into the vehicle.

Edit: hooked up a more advanced scanner, no oil pressure available on it, but doesn't necessarily mean anything, but no codes regarding a broken sensor (just some about cruise control which explains my lack of working cruise).
« Last Edit: October 15, 2020, 09:37:04 PM by GoChris »

Offline GoChris

  • CJA Members
  • Baby Wheeler
  • Posts: 68
Re: 2013 JK Oil Pressure
« Reply #1 on: October 19, 2020, 08:25:37 PM »
So, I'd imagine it has the oil sensor, pretty certain. However it was later 2013MY ones that had it on the dash menu (EVIC). Does anyone know if it's possible to flash my Jeep with a 2013 10A (someone says, but basically later 2013MY) ECU version?

Second question, are all oil senders the same, could I just T into the existing sensor wires to hook up a gauge, or do I have to install a T and the gauge sender for it to work? Not sure I can fit 2 senders in the stock location.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2750
Re: 2013 JK Oil Pressure
« Reply #2 on: October 19, 2020, 08:44:04 PM »
I assume your jeep does not have a factory oil pressure gauge?
Broken Axle
We deal in Jeep parts and performance
General repairs, maintenance and diagnostics on all vehicles
403-237-7706
www.brokenaxle.ca
New Address
Bay 10, 3925 56th ave SE calgary
Like us on the Facebook

Offline GoChris

  • CJA Members
  • Baby Wheeler
  • Posts: 68
Re: 2013 JK Oil Pressure
« Reply #3 on: October 19, 2020, 10:26:06 PM »
I assume your jeep does not have a factory oil pressure gauge?

Correct, they started in 2013, which mine is, but I guess later in the year? So 2013+ has it in the information center, which mine does not.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2750
Re: 2013 JK Oil Pressure
« Reply #4 on: October 19, 2020, 10:58:59 PM »
I suspect something like the Trail Dash 2 would have it and a lot more stuff too. But it’s a lot of monies.
Broken Axle
We deal in Jeep parts and performance
General repairs, maintenance and diagnostics on all vehicles
403-237-7706
www.brokenaxle.ca
New Address
Bay 10, 3925 56th ave SE calgary
Like us on the Facebook