Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Metal brake  (Read 1018 times)

0 Members and 1 Guest are viewing this topic.

4Play

  • Guest
Metal brake
« on: January 14, 2007, 08:00:00 PM »
Wondering if anyone has access to a metal brake to bend metal thick enough for a half arse rock slider.  I pulled the original flares and step off and have the holes still there from the step.  Just need 1 bend per side.  I can cut, fit and paint them.  I will be bolting them through the  body mounts underneith.  Any help would be great.  

Thanks.

Mike
Logged

4Play

  • Guest
Metal brake
« Reply #1 on: January 16, 2007, 10:10:55 PM »
Do the stock rubicon rockers have any form of protection, or just the looks.  I wouldnt mind them if I could find cheap enough... :wink:
Logged

merlin

  • Guest
Metal brake
« Reply #2 on: January 17, 2007, 11:17:19 PM »
all depends on the gauge, i can do it. if not head down to SAIT to the Thomas Riley building and talk to the sheetmetal guys.
Logged

4Play

  • Guest
Metal brake
« Reply #3 on: January 18, 2007, 06:58:18 AM »
Quote from: "merlin"
all depends on the gauge, i can do it. if not head down to SAIT to the Thomas Riley building and talk to the sheetmetal guys.


Thanks for the reply.  I was just thinking a thick as possable...!  Maybe 3/16???  I will consider SAIT.  Never thought of them.
Logged
Pages: [1]   Go Up
« previous next »