Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: tire clearance..  (Read 1138 times)

0 Members and 1 Guest are viewing this topic.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
tire clearance..
« on: April 08, 2007, 11:15:49 PM »
Ive got 31" MT's and oem wheels on my xj..at full lock or close to my tires are digging into my LCA's and doin a bit of damage. My rear tires are very close to my bottom leaf too... It seems like 31's are usually fine on stock backspacing etc but not always.

Anyone else have these probs and have some insight besides buying new wheels? wheel spacers maybe?
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Asia

  • Budget Lift
  • Posts: 288
tire clearance..
« Reply #1 on: April 08, 2007, 11:33:48 PM »
My YJ has some bolts on the knuckles that limit how far the front tires can turn, I adjusted them (added 3 washers - the lock nut is welded to the adjustment bolt) to prevent my 31" tires on stock Jeep Canyon wheels (5" back spacing) from touching my leaf springs at full lock.
Logged
near stock advocate

Offline cotaman

  • UberWheeler
  • Posts: 371
tire clearance..
« Reply #2 on: April 09, 2007, 06:35:09 AM »
cheapest route to get more clearnace is pick up some black steelies... the black daytona's that national sell with ( i think ) 3-3/4" back spacing should do the trick and adjust the steering stops on the front.  i think they sell those for around 60-70 a piece ( could be wrong )
Logged
98 ZJ, 5" lift, 4.10's, 33" Dick Cepek Mud Country's, 231 swap,  winch/bumper, rock rails, lincoln locker, CB, parked, waiting to pass SK insp
01 WJ, the pavement princess that has been mirror deep in a hole
RIP -- 88 XJ, 3" Skyjacker, 31 MT

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
tire clearance..
« Reply #3 on: April 10, 2007, 09:04:36 PM »
Hmm yea I could try adjusting the steering stops, may be easier to just get new steelies. Only thing there is then I gotta get my tires re-mounted...I shoulda bought new wheels in the first place!  :(
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
tire clearance..
« Reply #4 on: April 19, 2007, 12:43:42 AM »
Anyone running wheel spacers? Wondering if it would be a cheaper option..
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
tire clearance..
« Reply #5 on: April 19, 2007, 11:19:47 PM »
Ok one more question..
Whats stock backspacing on my xj? 5" and 5 on 4.5? Im going to get new wheels and want to make sure I get sufficient ones. Runnin 31x10.5 tires. Should I go with 3.75" BS?
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Rookie

  • CJA Members
  • That CB Yapper
  • Posts: 845
  • build it, break it, rebuild it better
tire clearance..
« Reply #6 on: April 20, 2007, 12:43:34 AM »
yep 3.75 bs

when I got mine Modern was cheapest place for the black steelies
Logged
TJ with some stuff

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
tire clearance..
« Reply #7 on: April 21, 2007, 11:22:18 AM »
Quote from: "Rookie"
yep 3.75 bs

when I got mine Modern was cheapest place for the black steelies


Right on thanks man  :)
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it
Pages: [1]   Go Up
« previous next »