Author Topic: question non jeep related (Read 1005 times)

Mudhawg · « **on:** May 26, 2007, 03:56:24 AM »

so after takin my zuk out this past weekend i have no clutch... 1st problem... the clutch cable had ripped through the firewall saturday mornng luckily my buddy had his welding rig so we re plated the firewall and i was rolling again... now i get anoher day of wheelin in... go to leave monday morning and no clutch??? could it be out of adjustment/packed with dirt???

Bnine · « **Reply #1 on:** May 28, 2007, 02:28:01 PM »

Stay out of the slop.

Check that the clutch fork, or slave is moving.

If the cable is working, you bought yourself a clutch because of the mud.

Mudhawg · « **Reply #2 on:** May 28, 2007, 02:33:35 PM »

so one way or another i gotta drop the tranny? ugh guess gotta get er done to go out canada day

Bnine · « **Reply #3 on:** May 28, 2007, 02:39:44 PM »

No, if the slave or fork doesnt move when you push the pedal, then the problem is exterior. Broken cable on a mechanical, bad master cylinder or slave if hydraulic.

If it does move, but you have no clutch, then its internal, and time to drop the trans.

Mudhawg · « **Reply #4 on:** May 28, 2007, 02:48:39 PM »

the truck still moves just slips VERY bad... like 5000rpm and im moving 2 feet i tryed driving it from the gravelpit to the staging area monday morning after the weekend and i made it 1/2 way and it wouldnt move

Bnine · « **Reply #5 on:** May 28, 2007, 02:50:29 PM »

Your clutch is done.

Mudhawg · « **Reply #6 on:** May 28, 2007, 02:51:14 PM »

time to go visit my buddy at autovalue and take him 169 dollars