Calgary Jeep Association

« previous next »
Pages: 1 [2]   Go Down

Author Topic: Starting build up - questions?  (Read 1650 times)

0 Members and 1 Guest are viewing this topic.

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: Starting build up - questions?
« Reply #15 on: December 28, 2007, 10:45:31 AM »
Yeah, you have to build to your own needs for sure.

If you keep good backspacing on your rims (4.5" plus) it will help keep the bearings and balljoints in the 44 alive for as long as possible.

If not, the additional weight of that motor will be pretty hard on them. More so if you wheel.

Good luck. I really like this build. Post pictures when you can.
Logged
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Starting build up - questions?
« Reply #16 on: December 28, 2007, 11:00:11 AM »
Starting the tear down tonight or tomorrow.
I was planning on extra wide flares and a "medium" backspace to allow for the wider axle so that sort of fits the bill. The new drive train is about 300 LBs heavier than the stock 6 banger


Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Starting build up - questions?
« Reply #17 on: December 29, 2007, 10:55:51 AM »
I think he's planning to run 33s. A 14B would be WAY overkill for 33s and the center section is huge and would be dragging.....
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Starting build up - questions?
« Reply #18 on: December 29, 2007, 06:25:19 PM »
Well, it's been a productive day, Out with the old , out with the old.of the beat up YJ. Also the Cummins, the 44 and the  9 inch. PRAY for me, the fat guys back is killing him after 12 hours of wrench pullin. Used parts coming up for sale soon.



« Last Edit: December 29, 2007, 10:42:05 PM by Fredduck »
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: Starting build up - questions?
« Reply #19 on: December 30, 2007, 07:55:32 AM »
Here is a link to the photo history of my mistress, and her new parts.

http://photoshare.shaw.ca/view/11816366873-1199025724-89511/
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's
Pages: 1 [2]   Go Up
« previous next »