Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: New drive shafts  (Read 874 times)

0 Members and 1 Guest are viewing this topic.

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
New drive shafts
« on: April 03, 2008, 07:48:45 PM »


New drive shafts made by Tattons in Salt lake city. Real good price PM me for more info.
I'm not a salesman but gosh their pretty.

« Last Edit: April 03, 2008, 08:40:19 PM by Fredduck »
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: New drive shafts
« Reply #1 on: April 09, 2008, 07:08:36 AM »
Quote from: Fredduck on April 03, 2008, 07:48:45 PM


Just a quick, why did you truss the axle on the underside and not on top?
Logged
'95 YJ with a few mods

Offline Fredduck

  • That CB Yapper
  • Posts: 607
  • RIDE ON
Re: New drive shafts
« Reply #2 on: April 09, 2008, 11:16:46 AM »
I didn't, they were that way when I got them.
If the budget allows, I may go to Dana 60's next yea.
So this is a stop gap measure.
I wanted to make sure I had enough Axle so the cummins wouldn't break them.
My first priority was to make the cummins run
Logged
3.9 CTD - 7000R4  NP241c SSYE, Dana 44.  9 inch, 4.10's  and 37's
Pages: [1]   Go Up
« previous next »