Calgary Jeep Association

Author Topic: HELP  (Read 882 times)

0 Members and 1 Guest are viewing this topic.

Offline JasonL_031

  • Budget Lift
  • Posts: 284
    • http://www.cardomain.com/ride/2449290
HELP
« on: May 08, 2008, 10:09:26 PM »
Ok i installed a 2 inch body lift a few months back and ever since i installed it i am having issues getting my jeep into 4 hi or N or even 4LO i need help cause this is starting to really squirt me off. my jeep is a 03 Tj Sport please get back to me soon.
1994 ZJ
6.5 inch custom lift
5.2L v8 with 5.9 exhaust
35x12.5r15 beadlocks
custom front bumper
98 leather interior
rugged ridge steering conversion
np231 tcase swap
HIDs
LED off road lights

jeepfusion

  • Guest
Re: HELP
« Reply #1 on: May 09, 2008, 05:39:52 AM »
Done a few body lifts on Tj's, and just wondering if you trimmed a little of the floor surrounding your tcase shift?

Offline Bnine

  • Talks waaay too much!
  • Posts: 2572
  • Sticky Fingers
Re: HELP
« Reply #2 on: May 09, 2008, 08:11:51 AM »
Did you use the supplied relocation bracket, and reset the linkage when it was all said and done?
My Mechanic Calgary
Mobile Auto Care
403-483-1083
[email protected]

Offline calltrex

  • Talks waaay too much!
  • Posts: 1398
Re: HELP
« Reply #3 on: May 09, 2008, 08:12:25 AM »
skyjacker makes a nice linkage addon...
........___________
.......//.......""""......\\
....=//___________\\=
.....(@)___JEEP_(__@)
......\____I===I____/
.../""""/........J
../""""/=(=)___....../""""/
./___/............==/""""/
....................../___

Walkerdee

  • Guest
Re: HELP
« Reply #4 on: May 21, 2008, 09:10:50 AM »
I have a 2 inch body lift on my 01 TJ and in my experience the only adjustment nessesary was to get under there and jimmy your linkage around until it shifts better.  The only time you should need to get into the skyjacker bracket is if you are 3 inches of body with a t-case drop kit in.  When you have a t case drop with the body lift it really pulls stuff out to lunch. I bought the skyjacker bracket and it just didn't work for me.  I ended up just lengthening the stock linkage to its extent.  No problems shifting anymore.