Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Installing a lift...  (Read 789 times)

0 Members and 1 Guest are viewing this topic.

outlaw

  • Guest
Installing a lift...
« on: June 18, 2008, 07:24:19 PM »
so I just ordered a 4" rubicon express lift for my YJ. Ive never done this before any tips or is it pretty basic stuff?
Logged

Dragonmaster

  • Guest
Re: Installing a lift...
« Reply #1 on: June 18, 2008, 09:14:10 PM »
Pretty basic if you've got a jack and a socket set, tape measure and some wrenches you're good to go.
Logged

Offline RedApe

  • Baby Wheeler
  • Posts: 79
    • http://www.island4x4.com
Re: Installing a lift...
« Reply #2 on: June 18, 2008, 09:59:15 PM »
Quote from: outlaw on June 18, 2008, 07:24:19 PM
so I just ordered a 4" rubicon express lift for my YJ. Ive never done this before any tips or is it pretty basic stuff?

Pen lube on the shackle bolts, Ubolts, and hangers......   :)
Logged
Keith <aka RedApe>
94 XJ <his>
97 TJ <hers>
http://www.island4x4.com STAFF
Four Wheel Stampeders member

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: Installing a lift...
« Reply #3 on: June 19, 2008, 07:02:53 AM »
Quote from: RedApe on June 18, 2008, 09:59:15 PM
Pen lube on the shackle bolts, Ubolts, and hangers......   :)

Exactly, start soaking ALL the bolts about 1 week before and they should be good to go when you install the lift.  If you don't have an impact gun, a good 18" breaker bar will be needed.
Logged
'95 YJ with a few mods
Pages: [1]   Go Up
« previous next »