Calgary Jeep Association

Author Topic: valve cover,argg  (Read 1489 times)

0 Members and 1 Guest are viewing this topic.

Offline Marco

  • UberWheeler
  • Posts: 374
valve cover,argg
« on: September 16, 2008, 10:01:35 PM »
Hey all, one of my jeeps has come back to me(room mate bought it so i can finish my TJ!) Plastic valve cover will NOT stop leaking oil, I have tried gasgets and gasget material and gasget in a tube(laymans terms) but cant cure this stupid thing. 90 YJ 2.5l. Thought was too hot all the time but isnt.....stumped. Tried to use search function here and internet but not much luck. Can i get a metel one? Thx!
locked and loaded

Offline boggincj7

  • Baby Wheeler
  • Posts: 87
Re: valve cover,argg
« Reply #1 on: September 17, 2008, 09:00:15 AM »
Not really 100% sure but isn't it common for these to crack? Mybe you have a hair line crack and didn't notice it. This happened to me once with a timing cover.
81 CJ7,304,waggy diffs,SOA,OBA,warn 8274,and always modifying.
Lethbridge Coulee Kruzers

yjcanibul

  • Guest
Re: valve cover,argg
« Reply #2 on: September 17, 2008, 12:48:54 PM »
those little bolts dont need much torq and when you redid with a good clean gasket and surface, did you start
in the middle and criss cross tightening working your way out to the ends ?

if so,  is it leaking randomly or everywhere or somewhere specific ?

Offline Marco

  • UberWheeler
  • Posts: 374
Re: valve cover,argg
« Reply #3 on: September 18, 2008, 12:22:10 PM »
have been told also that an overheat will warp th crap out of them. im goning to buy a new one and use proper tighten techniqu. thanks for help!
locked and loaded