best front diff options

[FullMetalJeep]

looking for idea's on what would be the best front diff swap options for a tj. I want to keep the track width as close to a stock TJ as possible as I dont have the means to shorten and modify the axles too much on my own.

So, the idea would be a front Dana 44 or Dana 60.

In the mean time I am looking for a direct bolt in TJ44 but dont have a lot of cash, and am not in a hurry. So entertaining the idea of building up a front from the scrap yard, unless I magically find a front TJ44.

The shortest track width 44's I know of would be out of an IH or Bronco. But thats where the knowledge ends.

I dont know what would be a good donor for a 60.

Dont get me wrong, I am not too much of a lazy guy, I am doing my own research online, but would like a few pointers from the experiened guys here to help me narrow my search.

thanks.

[BlackYJ]

Depends on how big you want to go as to where you go D44 or D60 or something else. Check out the Wagoneer D44s, slightly narrower I believe

[FullMetalJeep]

Depends on how big you want to go as to where you go D44 or D60 or something else. Check out the Wagoneer D44s, slightly narrower I believe

is the wagoneer's diff the same size as all FSJ?

[XJHERO]

is the wagoneer's diff the same size as all FSJ?

waggy=fsj
sum wide track some narrow

[boggincj7]

Try and find an 80's wagoneer dana 44. They are a little beefier than a scout 44 and it will be driver side drop. It will be 60" WMS to WMS.  Try and find one with manual hubs. I think most are except for a couple years which I think was 83 and 84 , they had some kind of vacume setup IIRC. Some even have flat top knuckles. The bolt pattern is 6 on 5 1/2 so you will have to deal with that. Hope this helps.