Calgary Jeep Association

Author Topic: T case drop question  (Read 2756 times)

0 Members and 1 Guest are viewing this topic.

Corey

  • Guest
T case drop question
« on: June 24, 2009, 11:56:58 AM »
Can you just use 1" spacers or do you need to put a whole 1" bar drill holes and longer bolts?

Offline fug

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2345
  • Airdrie Pick n Pull
Re: T case drop question
« Reply #1 on: June 24, 2009, 12:58:45 PM »
You can use washers/spacers/bar whatever you want with some longer bolts to make a tcase drop
Fug
TJ Rubicon

Corey

  • Guest
Re: T case drop question
« Reply #2 on: June 24, 2009, 02:45:42 PM »
Now what size and where can I find longer bolts that won't break under pressure?

Offline Crunch

  • Budget Lift
  • Posts: 253
Re: T case drop question
« Reply #3 on: June 24, 2009, 06:57:36 PM »
National 4x4 has them-$70.00 for the spacer kit
2000 TJ 4" lift on  33's, 1" Body lift,Rear locker,Warn Front Bumper
12,000lb Titan Winch,Rough country Rock Crawler Rear Bumper
Custom made Rock Sliders By Brink

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: T case drop question
« Reply #4 on: June 24, 2009, 10:35:50 PM »
i have the blocks sell em for cheep
1984 Chevy 6" Lift 40" Boggers

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: T case drop question
« Reply #5 on: June 24, 2009, 11:43:56 PM »
Can you just use 1" spacers or do you need to put a whole 1" bar drill holes and longer bolts?

why are you thinking about a T case drop
are you having vib issues or are you lifted
maybe theres another way like a 1.25" body lift and a 1" motor mount lift will help reduce vibs
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Corey

  • Guest
Re: T case drop question
« Reply #6 on: June 25, 2009, 10:37:25 AM »
I have a 2.5"lift and a 2" body lift and the drive angles are causing me to tear out my transmision mounts and causing lots of vibrations!

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: T case drop question
« Reply #7 on: June 25, 2009, 06:03:17 PM »
well i would consider a motor mount lift then if you already have the body lift . mine as well keep the skid plate as high as you can since we all know how low they hang

im running a 4" suspension 1.25" body lift and a 1" motor mount lift and a stock drive shaft and all is good
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: T case drop question
« Reply #8 on: June 25, 2009, 06:03:40 PM »
rough country sells motor mount lifts for 50 bucks .
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Corey

  • Guest
Re: T case drop question
« Reply #9 on: June 25, 2009, 08:38:13 PM »
Wouldn't a motor mount lift cause the fan to hit the shroud?

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: T case drop question
« Reply #10 on: June 26, 2009, 07:02:09 AM »
not if you have a body lift .. what kind of motor do you have 4 or 6 and have you moved your shroud when you did you body lift
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Corey

  • Guest
Re: T case drop question
« Reply #11 on: June 26, 2009, 10:29:16 AM »
I have the 6 and the body lift was done when I bought the jeep