Calgary Jeep Association

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: Waytec's Cherokee Flares  (Read 7581 times)

0 Members and 7 Guests are viewing this topic.

Offline Brink

  • UberWheeler
  • Posts: 445
Waytec's Cherokee Flares
« on: November 22, 2009, 02:40:33 PM »
Just finished up the flares on Waytec's Cherokee.

Before pics.  Cherokee with 3.5"lift and 31's....






Ripped off the old flares and cut the opening as big as it could go.  Then bent up some tubing...




Sheeted them in....



Finished product.  Cherokee with 3.5"lift ready for 33's-35's and street leagal tire coverage...











Heads up to anyone thinking of doing their own set.....the rear passengers inside panel in the cargo area is really close to the outside sheetmetal on your very last weld of the project.......ask me how I know  :-[
Logged

Offline FiEND

  • Talks waaay too much!
  • Posts: 3775
  • Wrecking Ball
Re: Waytec's Cherokee Flares
« Reply #1 on: November 22, 2009, 03:46:33 PM »
fantastic job.
Logged
1Wide2High
ILV2FRT
'97 TJ [sold]
'17 JK Rubicon

Offline Brink

  • UberWheeler
  • Posts: 445
Re: Waytec's Cherokee Flares
« Reply #2 on: November 22, 2009, 03:48:14 PM »
The pics don't do them justice. They look much better in person even.

Thanks though. Glad you like them.

The work needed on the inner fenders in the rear to make this work was a bitch though. It was 4hrs per side just to cut and rework the rears before I bent any tube at all. The fronts not so bad.

In the end I got him about 4-5" in the rear and about 8" in the front. That turns his 3.5" lift into the same clearance as 11" up front where the cherokees can flex. The 5" improvement in the rear is plenty for a non-flexy leaf spring setup like the cherokees have.

I'd run 35's on it
« Last Edit: November 22, 2009, 03:50:21 PM by Brink »
Logged

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Waytec's Cherokee Flares
« Reply #3 on: November 22, 2009, 04:42:46 PM »
Your tires are too small.  :D
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Re: Waytec's Cherokee Flares
« Reply #4 on: November 22, 2009, 04:54:48 PM »
33s are the plane right now but if that deal falls though and I have to get new, I am thinking 35s
Logged
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Waytec's Cherokee Flares
« Reply #5 on: November 22, 2009, 04:56:49 PM »
that looks fanntastic!@
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline dunl

  • Talks waaay too much!
  • Posts: 1895
    • Red Deer Jeep Packrats
Re: Waytec's Cherokee Flares
« Reply #6 on: November 22, 2009, 05:11:54 PM »
Quote from: Waytec on November 22, 2009, 04:54:48 PM
33s are the plane right now but if that deal falls though and I have to get new, I am thinking 35s

Just kidding man....the flares look great.  :)
Logged
`48 CJ2A, `54 CJ3B, `97 TJ, and 03 WJ...batting close to .500 when it comes to jeep models owned vs. jeep models created.....
Red Deer Jeep Packrats
www.reddeerjeep.com

Offline Brink

  • UberWheeler
  • Posts: 445
Re: Waytec's Cherokee Flares
« Reply #7 on: November 22, 2009, 05:29:54 PM »
Nice set of 35"KM2's on Edmonton Jeep today  :D
Logged

Offline Mudhawg

  • Talks waaay too much!
  • Posts: 1747
  • Rig Life
Re: Waytec's Cherokee Flares
« Reply #8 on: November 22, 2009, 05:50:17 PM »
those look sweet Brink  ;D
Logged
1984 Chevy 6" Lift 40" Boggers

Offline esi

  • That CB Yapper
  • Posts: 633
Re: Waytec's Cherokee Flares
« Reply #9 on: November 22, 2009, 06:00:51 PM »
I just started something similar today for my ZJ.


Nice work
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Waytec's Cherokee Flares
« Reply #10 on: November 22, 2009, 06:25:19 PM »
Man I need to get a tube bender, been wanting to do something like that on the ZJ for a while now.
Logged
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline dac

  • That CB Yapper
  • Posts: 516
Re: Waytec's Cherokee Flares
« Reply #11 on: November 23, 2009, 07:17:50 AM »
Quote from: Brink on November 22, 2009, 02:40:33 PM
.....the rear passengers inside panel in the cargo area is really close to the outside sheetmetal on your very last weld of the project.......ask me how I know  :-[

Do you smell smoke?
Logged
This is not 'Nam, this is wheeling.  There are rules.

Offline cablesmurf

  • Talks waaay too much!
  • Posts: 1538
  • Relapsed Jeep Addict
Re: Waytec's Cherokee Flares
« Reply #12 on: November 23, 2009, 12:23:44 PM »
Quote from: Waytec on November 22, 2009, 04:54:48 PM
33s are the plane right now but if that deal falls though and I have to get new, I am thinking 35s

One word...

REGEAR!!!!
Logged
Hi, my name is Dan and I'm a Jeepaholic

Offline Waytec

  • Talks waaay too much!
  • Posts: 1972
  • not all there
Re: Waytec's Cherokee Flares
« Reply #13 on: November 23, 2009, 03:47:22 PM »
No Dan I like it underpowered and gutless.
4:56 are in the works and a locker.
Logged
Why does your Jeep say Toyota on it?
The obstacle is the path.

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: Waytec's Cherokee Flares
« Reply #14 on: November 23, 2009, 04:47:47 PM »
looks good guys.
cutin the back fenders is not fun at all. did you have a fire in the back??
im just finaly finishing my front, the backs are still to come after a bit of wheeling  ;)
Logged
Like ivry soap....pure as frack
DD
Get at me Wolf
Pages: [1] 2 3   Go Up
« previous next »