Calgary Jeep Association

« previous next »
Pages: 1 2 3 [4] 5   Go Down

Author Topic: PLASMA CUTTERS, WELDERS, COMBO MACHINES  (Read 23457 times)

0 Members and 1 Guest are viewing this topic.

Offline Brink

  • UberWheeler
  • Posts: 445
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #45 on: April 09, 2010, 09:54:25 PM »
I fired up a LP-50D today and played around with it a bit.

In my totally biased opinion it was pretty kick arse.  Nothing like trial by fire.  I stepped straight into freehanding 5/8 plate with it.....







Then cut some 1/4".....







And came up with this for my Alternator conversion....










Logged

Offline i_go_commando

  • UberWheeler
  • Posts: 350
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #46 on: April 10, 2010, 11:50:04 PM »
was there supposed to be an owners manual in the box? or is it all online?
Logged
1973 jeep commando -amc 360, 727,203/208, waggy d 44 and amc20- soa, OBA- on hiatus
1958 fc 170 cabover quad cab 3/4 pickup.continetal engine/ 700r4/ dana 300 current project

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #47 on: April 11, 2010, 08:38:06 AM »
We were playing with Dom's plasma on Sat.  Chris (cfbaars) had read the instructions on-line. 

It was pretty sweet cutting! 
Logged
04 TJ Rubi

Offline Brink

  • UberWheeler
  • Posts: 445
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #48 on: April 11, 2010, 09:47:50 AM »
Quote from: i_go_commando on April 10, 2010, 11:50:04 PM
was there supposed to be an owners manual in the box? or is it all online?

All online Chris.  Just go to http://longevity-inc.com/details.php  select your model, and click the tab for the manual.
Logged

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #49 on: April 29, 2010, 08:52:07 AM »
Hi Eric

you still around? PM sent
Logged

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #50 on: April 29, 2010, 11:58:13 AM »
My 50 series plasma cuts 1/2 plate slike butter (that is when it's set at 30amp)... It's freakin' awesome... Wicked deal .. Thanks Eric!

I'll have pics soon
Logged

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #51 on: June 30, 2010, 12:01:47 PM »
I just have to add to how great the Pilot Arc LP40D plasma is, I just fabricated these 1/4inch controll arm mounts this morning, I thought I would need a 60gal air compressor, but the little 5gal compressor does the job.  great plasma for anyone who does some fab work in their garage for a great price.





« Last Edit: June 30, 2010, 12:10:21 PM by raf2379 »
Logged

Offline Rich99

  • Budget Lift
  • Posts: 250
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #52 on: July 01, 2010, 10:37:37 AM »
Nice work!
Logged
Rich.

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #53 on: July 01, 2010, 01:48:03 PM »
That's some sweet work, Raf. I think I have a hunch as to where those are going.... :P
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline raf2379

  • That CB Yapper
  • Posts: 752
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #54 on: July 01, 2010, 06:10:24 PM »
Quote from: w squared on July 01, 2010, 01:48:03 PM
That's some sweet work, Raf. I think I have a hunch as to where those are going.... :P

yep we just installed them today on the Immortal XJ, i'm sure Trevor will put them through a good test to see how they hold up.
Logged

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #55 on: July 01, 2010, 09:23:42 PM »
I am going to beat the ever loving crap out of them (seeing as they are a prototype.... :D)
Logged
Quote from: w squared on October 26, 2010, 10:44:27 AM
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #56 on: July 01, 2010, 09:45:28 PM »
I like the way that you boxed them - like built-in skids.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline Brink

  • UberWheeler
  • Posts: 445
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #57 on: December 05, 2010, 07:31:39 PM »
CHRISTMAS SPECIAL ON LONGEVITY

For the month of December Longevity is offering no GST and free shipping on all units.

Most are in stock with me right now so you can have them overnight.

Plasma cutters start at $524.99 Can $$$


See www.longevity-inc.ca for the model line up.  Then let me know what you need.  8)
Logged

Offline Brink

  • UberWheeler
  • Posts: 445
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #58 on: December 11, 2010, 10:53:21 PM »
Logged

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: PLASMA CUTTERS, WELDERS, COMBO MACHINES
« Reply #59 on: December 27, 2010, 09:48:54 AM »
Ok I have  to practice a bit more to get strait lines like this... or get a CNC ... ;D

I've owned my little 50AMP machine for about a year now... it still works great!

Great bang for the buck!

Bump!
Logged
Pages: 1 2 3 [4] 5   Go Up
« previous next »