Calgary Jeep Association

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: 04 rubicon half cab  (Read 12137 times)

0 Members and 1 Guest are viewing this topic.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
04 rubicon half cab
« on: October 11, 2010, 08:35:17 PM »
well i probably should start from the begining of my full build but oh well

fast notes

4 inch lift rough country xtrem flex  fully adjustable control arms
1.25 inch body lift
1 inch motor mount lift
custom cut front bumper
warn power plant (for sale)
100 watt front spot lights
5.13 gears
35 inch mickey thompson MTZ
air aid intake system and throatle body spacer
and the newest add is my custom half cab  

this is my DIY half cab .    i took a full hard top and cut it just past the main hoop on the cage
closed it in with 1/4 ply wood and fiber glass   some bondo to clean up the defects and then once i have it to the shape i  want its going to get one more layer of fiber glass then bed liner to finish it up



more pics to come once it is complete and painted
« Last Edit: October 11, 2010, 08:39:20 PM by Rubi03 jef »
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 04 rubicon half cab
« Reply #1 on: October 11, 2010, 08:47:12 PM »
crap how do i post a pic
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: 04 rubicon half cab
« Reply #2 on: October 11, 2010, 09:33:55 PM »
I wanna see a pic!  You have to host them on a site such as www.photobucket.com, then copy/paste the url between the IMG tags. There is a lil button near the emooticons you will see, click that and the IMG tags will appear....hope that helps.
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Zombie

  • UberWheeler
  • Posts: 398
  • Jeff the Zombie Jeep
Re: 04 rubicon half cab
« Reply #3 on: October 12, 2010, 08:28:50 AM »
rookie   ;)
haha, I have done that a few times too
Logged
97 Red XJ, 4.5", 31" mud's, ARB front, 9500lb winch, bushwhacker's, warn sliders, HnT SYE and CV drive shaft - written off and sold for parts :(

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 04 rubicon half cab
« Reply #4 on: October 12, 2010, 11:20:24 AM »
willl do . .working on it now
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 04 rubicon half cab
« Reply #5 on: October 12, 2010, 11:50:39 AM »
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: 04 rubicon half cab
« Reply #6 on: October 12, 2010, 11:55:11 AM »
Yup. That did 'er.

Looks like you've already got the hard part wrapped up - just a matter of fill, sand, fill, sand, paint. I know you're wearing a good mask when you're sanding that stuff, right?
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline frenchy

  • Talks waaay too much!
  • Posts: 1417
Re: 04 rubicon half cab
« Reply #7 on: October 12, 2010, 11:56:31 AM »
What are your plans for roll cage?
Logged
Jeep
With stuff

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: 04 rubicon half cab
« Reply #8 on: October 12, 2010, 12:55:19 PM »
Quote from: w squared on October 12, 2010, 11:55:11 AM
I know you're wearing a good mask when you're sanding that stuff, right?

/agree fiberglass isn't friendly at all to the lungs, especially the amount you'll be working with.

any plans for "bed liner" or anything like that?
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: 04 rubicon half cab
« Reply #9 on: October 12, 2010, 01:34:07 PM »




I'm too damn lazy to do the rest...
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 04 rubicon half cab
« Reply #10 on: October 12, 2010, 03:18:20 PM »
thanks vinman for posting the pics


as for sanding and all that stuff im doing it as we speak
 its out doors and ya im wearing a mask and full cover alls so i dont get it all over myself

after all the fiber glass is done ill be bed linering the whole thing inside and out
and that should hide my defects since im far from being a good body fiber glass guy

but should turn out pretty nice all said and done

more pics tomorrow after first coat of bed liner
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: 04 rubicon half cab
« Reply #11 on: October 12, 2010, 05:40:33 PM »
bed liner is rolled on .. didnt cover my defects like i hoped .. so i might have to do alot more bondo work then i was hopeing but itll be good enough for this winter . and ill just get it all cleaned up next year

pics will be up tomorrow when i get more sun light to take them in

rear window will be installed this weekend and rear cover completed as well this weekend

and ill make a huge effort to make it to the meeting next week
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline parabs

  • That CB Yapper
  • Posts: 504
Re: 04 rubicon half cab
« Reply #12 on: October 12, 2010, 10:30:11 PM »
I like it!!
Logged
2000 TJ Sahara - Sold
2006 Lincoln Mark LT - Bassani Exhaust
2007 Harley Davidson F150 - Nothing to note.

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: 04 rubicon half cab
« Reply #13 on: October 12, 2010, 10:40:00 PM »
jeff, what are you doing for a roll bar???????????

but, i think its bad a$$ ;)
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: 04 rubicon half cab
« Reply #14 on: October 12, 2010, 10:46:48 PM »
Based on his facebook pics, the factory rollbar is just inside the half cab.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(
Pages: [1] 2 3   Go Up
« previous next »