Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: I Think Aussie Measuring Tapes are Screwy - OME 2"  (Read 5206 times)

0 Members and 5 Guests are viewing this topic.

Offline silverfox

  • That CB Yapper
  • Posts: 612
  • drawrof og nac enoyna
I Think Aussie Measuring Tapes are Screwy - OME 2"
« on: February 02, 2011, 08:16:27 PM »
First off thanks to Jay at Chanda Precision for doing an awesome job on getting my lift in and doing it on budget and right smack on time.

After much decision making and discussion and questions and queries I went with the OME 2" lift, HD Coils, Currie Front Lower Control Arm, Long Travel Shocks, Extended Brake Lines, extended bump stop,  and front and rear adjustable track bars all from Stan at Northridge (thanks Stan)

Interesting part is OME sells it as a 2" lift................I think them Aussie's are a little mixed up on there measuring

Before



After



Before



After



Before



After



Before



After



Overall before upping the tires to 35" it is up pretty much bang on 4 inches.  I didn't think a 4 difference in ride height would be that noticeable but it is very much noticeable. I am pretty sure I noticed a difference in ride with the HD springs as well, seems a bit more bouncy. Also it may have been my imagination but it also seemed a bit less stable solid on the road (I could feel it lean a bit more it seemed).  I am very happy at this point but now of course I am jonesing to get the tires on it..............looks a little like a skateboard at the moment :)

Can't wait to get it back on the trail and see how things work compared to before.

Thanks again Jay...............can't wait for the rubber and the winch.
« Last Edit: February 02, 2011, 08:19:28 PM by SilverFox »
Logged
2018 JLU Lifted on 37's

Offline Immortal

  • Talks waaay too much!
  • Posts: 3463
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #1 on: February 02, 2011, 08:25:43 PM »
Ahhhhhhhhhhhhh....... our little guy is growing up......
Logged
Quote from: w squared on October 26, 2010, 10:44:27 AM
if we were smart with our money we wouldn't own Jeeps.
Here's your cup of STFU... ENJOY!

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #2 on: February 02, 2011, 08:38:58 PM »
Yup, it'll definitely lean more for sure - higher center of gravity. I think you'll be VERY happy with that lift.

Did you get coil retainers in the rear, and longer sway bar links?
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline silverfox

  • That CB Yapper
  • Posts: 612
  • drawrof og nac enoyna
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #3 on: February 02, 2011, 08:48:58 PM »
Quote from: w squared on February 02, 2011, 08:38:58 PM
Yup, it'll definitely lean more for sure - higher center of gravity. I think you'll be VERY happy with that lift.

Did you get coil retainers in the rear, and longer sway bar links?

Front and rear.........and yes
Logged
2018 JLU Lifted on 37's

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #4 on: February 02, 2011, 09:11:02 PM »
Drive it for a week and let the springs settle. Remeasure. I bet it drops an inch or so.
Logged

Offline silverfox

  • That CB Yapper
  • Posts: 612
  • drawrof og nac enoyna
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #5 on: February 02, 2011, 10:24:20 PM »
Quote from: AV.NINE on February 02, 2011, 09:11:02 PM
Drive it for a week and let the springs settle. Remeasure. I bet it drops an inch or so.

Dont mind if it settles a bit but hopefully it will not be more than an inch.  That is part of the reason that I went with the HD Coils
Logged
2018 JLU Lifted on 37's

Offline AstraX

  • That CB Yapper
  • Posts: 863
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #6 on: February 03, 2011, 09:29:28 AM »
Looks Good Shawn. Makes you wonder why they don't just sell it as a 3"-4" lift....
Logged

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #7 on: February 03, 2011, 10:47:43 AM »
Quote from: AstraX on February 03, 2011, 09:29:28 AM
Looks Good Shawn. Makes you wonder why they don't just sell it as a 3"-4" lift....

Because Australia has lift laws.
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline BlackYJ

  • Talks waaay too much!
  • Posts: 3392
    • http://www3.telus.net/ccjc/page0002.html
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #8 on: February 03, 2011, 01:07:37 PM »
Quote from: AstraX on February 03, 2011, 09:29:28 AM
Looks Good Shawn. Makes you wonder why they don't just sell it as a 3"-4" lift....

Because they can't get the ride quality to where they demand of their products in that lift range.
Logged
'95 YJ with a few mods

Offline Tinkerer

  • UberWheeler
  • Posts: 313
    • My (OLD OLD OLD) website
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #9 on: February 03, 2011, 06:12:32 PM »
Quote from: SilverFox on February 02, 2011, 08:16:27 PM
Interesting part is OME sells it as a 2" lift................I think them Aussie's are a little mixed up on there measuring
They use those Texas inches... and we all know everything is bigger in Texas!  Looks good...
Logged
2004 TJ Rubicon 2.5" Cage Puck Lift
LT285/75R15 Trxus MT's
ARB Bullbar and Warn XD9000i winch
Garvin Wilderness Swingaway Rack
Cobra 75WXST CB, Yaesu FT8900 Ham
VE6PDB - usually on VE6RYC

Offline JJonesee

  • Budget Lift
  • Posts: 143
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #10 on: February 21, 2011, 03:58:41 PM »
Quote from: Tinkerer on February 03, 2011, 06:12:32 PM
They use those Texas inches... and we all know everything is bigger in Texas!  Looks good...

Yes...  Its a Texas thing.

It will settle - all of the OME stuff does.  Its part of the progressive rate they build into the coil.  Great products designed for more abuse than you can imagine.

Fabtech used to be the worst - the SO Cal crowd is alot of high speed whoops, so the coils are always 2-3" higher than labled.

At the shop I used to work at in Texas, I swear we had a berm behind the shop - if customers complained it was too high - we told them to take it at about 20km/hour.  The rapid cycling caused the lift to settle faster. (this is not a recommendation by the way - however please film if you do)
Logged
06' Rubicon LJ
52' M-100
82' Scrambler x 3

Offline silverfox

  • That CB Yapper
  • Posts: 612
  • drawrof og nac enoyna
Re: I Think Aussie Measuring Tapes are Screwy - OME 2"
« Reply #11 on: February 21, 2011, 08:12:57 PM »
Two wheeling trips and she has settled about a half inch.
Logged
2018 JLU Lifted on 37's
Pages: [1]   Go Up
« previous next »