Calgary Jeep Association

« previous next »
Pages: [1] 2   Go Down

Author Topic: OH look He DId it Again  (Read 6634 times)

0 Members and 5 Guests are viewing this topic.

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
OH look He DId it Again
« on: November 11, 2011, 08:32:38 PM »
Yeah thats right its time for SOME NEW AND EXCITING TIMES FOR EMF........

oh and whats this little gem...




Oh And PATENT PENDING so every company out there who wants to copy it can PAY THE MAN
Logged

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: OH look He DId it Again
« Reply #1 on: November 11, 2011, 09:18:06 PM »
Compatable with my rugged ridge inverted T?

How much!!!??
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #2 on: November 11, 2011, 09:21:38 PM »
thats just a teaser the roll out is coming.......

so far we are working on things....

but we can make monkeys fly out of the threads if u would like  :P  ;D
Logged

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: OH look He DId it Again
« Reply #3 on: November 11, 2011, 09:28:57 PM »
I think you need a test ZJ. One that is white and on 6" of lift. ;)
Logged

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: OH look He DId it Again
« Reply #4 on: November 11, 2011, 09:49:25 PM »
maybe just for fun, stand one next to a pepsi can to compare size. i think even Borat would be jealous ;D
Logged
YJ=Y’all Jealous

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #5 on: November 12, 2011, 08:40:28 AM »
okay so they are coming and they will be any thread pitch required and shank size....  its gonna take us a bit to figure out everyjoint we need to start making.... so bare with us and if for Any reason anything tierod or ball joint needs to be replaced on your rig save the old ones for me less we have to buy new the better...

these will be the answer..

some facts i don't think everyone gets as i really didn't to recent...

all materials are 4140, bodies, races, and pins..(good luck hammer one of these out)

bodies are zinc coated(gold), races, rings and caps are also zinc coated to

pins are nitride for best wear (but not required this is more for the hem joints)(special orders can go out inchoated to save time)

there are no boots on our joints.. there is a wiper seal built into either side of the race..

for connection points like drag links we use a poly urethane spacer to ensure pin is seated correct

for flipping steering to above the knuckle, its going to be a combination of a asshat with the new taper in it installed into the existing hole to flip orientation

fully greaseable...fully rebuildable...(end cap comes off to expose the new trick retaining system, slam two new races in it, reinstall retainer, replace cap redrill set screw and go)

oh and as much as i want to elaborate on the new retainign system its not my place and its coming soon...

full roll out of new products around christmas

thanks for all that are interested...

now hopefully clay doesnt kill me for posting teaser shots lol
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: OH look He DId it Again
« Reply #6 on: November 12, 2011, 10:16:55 AM »
Quote from: heep-a-lop on November 11, 2011, 08:32:38 PM
Yeah thats right its time for SOME NEW AND EXCITING TIMES FOR EMF........

oh and whats this little gem...




Oh And PATENT PENDING so every company out there who wants to copy it can PAY THE MAN

they are sexy looking .. i might need this for my rig
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline frenchy

  • Talks waaay too much!
  • Posts: 1417
Re: OH look He DId it Again
« Reply #7 on: November 12, 2011, 11:12:45 AM »
Quote from: heep-a-lop on November 12, 2011, 08:40:28 AM

for flipping steering to above the knuckle, its going to be a combination of a asshat with the new taper in it installed into the existing hole to flip orientation
Nice stuff for sure!

I have my Drivers side steering flipped, what is this asshat you speak of?  ;D
No space around my frame swaybar bracket for a bigger joint, but I just ordered some $30 brackets that should solve that. Test fit before purchase?

Oh, any the wipers are made of what? Good for what temps?
Logged
Jeep
With stuff

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: OH look He DId it Again
« Reply #8 on: November 12, 2011, 11:22:39 PM »
Quote from: frenchy on November 12, 2011, 11:12:45 AM
Oh, any the wipers are made of what? Good for what temps?


I seem to remember a video posted online of one of their joints spun up to 225rpm at 200ft/lbs of pressure... the grease inside lit on fire, yet the joint held out. Pretty damn hot?

:D

Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #9 on: November 13, 2011, 08:21:48 AM »
i dont know if u can tell but the bottom picture thats a small body joint... the head on our tie rods is about the size of a qa1 joint that on your trackbar if u have a aftermarket one

the retention system is for everything to... ball sockets, tie rods, ball joints and heim joints... so all our bodies are patent pending...our rams no but u can run our rams without our ball sockets..

okay and by wiper seal i mean its machined into the race's themselves so they are 4140..

a asshat is just that it would go through the backside of the existing hole after its drilled out and re tapers the hole to the top of the knuckle.... they are installed with a 1/2" bolt and  are a press fit.....

and yes this should be that video....

http://www.youtube.com/watch?v=KF90npdAKsE&feature=youtu.be

flash point of the grease was latter found out to be 900 degrees

now a little background on this video.. this is one of our older bodied joints that has the old set screw holding the cap on.... this video was made for the sole reason to show u even if the joitn completley back out they are still good to go..... this joint that was tested was thrown into a rig after...

oh and who can buy anything else when u got the kid salesman
http://tinypic.com/player.php?v=2mqou1z&s=7
« Last Edit: November 13, 2011, 08:24:23 AM by heep-a-lop »
Logged

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #10 on: November 13, 2011, 08:25:45 AM »


heres a better picture for size comparison dont mind the flash....

thats a small bodied 1" shanked heim joint and a qai joint off a rubicon express track bar
Logged

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #11 on: November 14, 2011, 09:28:40 AM »


opps i posted another one
Logged

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: OH look He DId it Again
« Reply #12 on: November 14, 2011, 09:29:53 AM »


well his two year old friend wanted to come out and play( i believe it was around 700 climbs with the mat tracks of sunshine....) and those are stock tie rods
Logged

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: OH look He DId it Again
« Reply #13 on: November 14, 2011, 06:33:56 PM »
I'm gonna keep hounding you for ZJ steering lol, I swear my tie rods flex when I touch the wheel.

Looks very beefy 8)
Logged

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: OH look He DId it Again
« Reply #14 on: November 14, 2011, 08:48:03 PM »
Those rods look awesome, but is that the best place for the ram?  :o
Logged
Pages: [1] 2   Go Up
« previous next »