Calgary Jeep Association

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: EMF BUILT HEMI TJ  (Read 12255 times)

0 Members and 2 Guests are viewing this topic.

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
EMF BUILT HEMI TJ
« on: November 16, 2011, 09:29:34 AM »
Okay so some of u may know this rig it has  a little history of being everywhere and never done... well we finished it





















this was one of 3 tj kits that where done wayv back when... one is on erins tj, one is on jamies old jeep and one is finally here

someone at a shop somewhere convinced the owner that he could drop a hemi into a tj and still use this kit.....  Well rear driveshaft woulda never worked...

so clay had to extended the links add hydro assist and just in general make this thing eat the rock course(those pictures are on his camera)

]it was one cool rig when done and the owner was smiling form ear to ear...

this was done about 6 months back
« Last Edit: November 17, 2011, 02:16:56 AM by FiEND »
Logged

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: EMF BUILT HEMI TJ
« Reply #1 on: November 21, 2011, 11:08:00 AM »
Curious as to why you chose a radius arm set up over a 3 link? And the rear radius set up over a triangulated 4?

Nice truss work as usual.
Logged

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: EMF BUILT HEMI TJ
« Reply #2 on: November 21, 2011, 04:56:16 PM »
Quote from: AV.NINE on November 21, 2011, 11:08:00 AM
Curious as to why you chose a radius arm set up over a 3 link? And the rear radius set up over a triangulated 4?

The rear  sure look like a 4 link to me.
Logged
Lockers
Cuz ya can't kick arse with only one leg

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: EMF BUILT HEMI TJ
« Reply #3 on: November 21, 2011, 05:06:33 PM »
Quote from: AV.NINE on November 21, 2011, 11:08:00 AM
Curious as to why you chose a radius arm set up over a 3 link? And the rear radius set up over a triangulated 4?

Nice truss work as usual.

its a 4 link for sure . its just upper triangulated . not upper and lower .

Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline AV.NINE

  • Talks waaay too much!
  • Posts: 1872
Re: EMF BUILT HEMI TJ
« Reply #4 on: November 21, 2011, 05:20:29 PM »
Yup my bad.
Logged

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: EMF BUILT HEMI TJ
« Reply #5 on: November 21, 2011, 06:18:24 PM »
Now go out and draw 2 parrallel lines in the snow, about ten feet long and ten feet apart like this: I    I.

And then see if the jeep can drive from one line across the other under it's own power, that will be a real feat for that jeep.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Tomtwoshoes

  • Baby Wheeler
  • Posts: 50
Re: EMF BUILT HEMI TJ
« Reply #6 on: November 21, 2011, 09:53:58 PM »
Hey cool jeep   can you tell me who built and were and if the are into building more ???????
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: EMF BUILT HEMI TJ
« Reply #7 on: November 21, 2011, 10:17:41 PM »
Quote from: Tomtwoshoes on November 21, 2011, 09:53:58 PM
Hey cool jeep   can you tell me who built and were and if the are into building more ???????


read the first post   

EMF finished the build but i beleive it was started else where
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: EMF BUILT HEMI TJ
« Reply #8 on: November 22, 2011, 05:42:18 AM »
Quote from: Rubi03 jef on November 21, 2011, 10:17:41 PM

read the first post   

EMF finished the build but i beleive it was started else where

I'm pretty sure EMF did the suspension work years ago before the Hemi went in.
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: EMF BUILT HEMI TJ
« Reply #9 on: November 22, 2011, 07:24:54 AM »
yes clay did and when it left the shop it was working but when u throw a hemi in and tell the owner drive shafts will be same length.....

oh and this is the exact same kit thats on erins tj (dont ask)  and also on Jamies old tj which is now owned by little dave and is mean and flexy....(had it in the rock course a few month back)

i am sure he still has everythign for the kit... i know where erins kit is.... i could talk to him for sure...

this was a emf built tj long arm kit...

oh and this jeep that cant drive betwen parrelle lines was through our rock course with clay driving and the owner driving and went out on august long i do believe( or was it september)

overall this rig was a gong show i think everyone in the city had a hand on it but in the end it left our shop working awesome and finished
Logged

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: EMF BUILT HEMI TJ
« Reply #10 on: November 22, 2011, 10:59:45 AM »
Little taller then What I like but still looks good

I'll bring mine out when it's done And try out ur rock course
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: EMF BUILT HEMI TJ
« Reply #11 on: November 23, 2011, 06:48:04 PM »
yeah he wanted it to clear with no modifing of the body... and also wanted it kept street legal (lol)

but yeha once its done they are there and they are sandstone so really they dont hurt to much...
Logged

Offline cablesmurf

  • Talks waaay too much!
  • Posts: 1538
  • Relapsed Jeep Addict
Re: EMF BUILT HEMI TJ
« Reply #12 on: November 28, 2011, 12:00:18 AM »
That thing should have been put to rest years ago. Multiple nervous brake downs, numerous burned bridges and years of cashed in RRSP's for that. I wonder if it was really worth it...

That's the world's most expensive TJ right there folks.

Where's the rope ladder for the little guy? or did Clay custom fab a hydro assist elevator for him?

Wonder if he's still cruisin past the high schools trying to impress the young ladies?

Hahaha!
« Last Edit: November 28, 2011, 12:04:47 AM by cablesmurf »
Logged
Hi, my name is Dan and I'm a Jeepaholic

Offline heep-a-lop

  • UberWheeler
  • Posts: 361
  • EMF WHORE
    • EMF Rod Ends And Steering Components
Re: EMF BUILT HEMI TJ
« Reply #13 on: November 28, 2011, 08:33:58 PM »
lol cablesmurf u hit it right on the head there..... the suspension works awesome the engine is a boat anchor in my opinion... but that could be all the front wheel burnouts at another shop... it couldnt do a front dig with just the front hoked up drivin into the shop...

and answers to questions probally still cruizin and no elevator or hydro assit  stairs
Logged

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: EMF BUILT HEMI TJ
« Reply #14 on: November 28, 2011, 10:16:34 PM »
Quote from: cablesmurf on November 28, 2011, 12:00:18 AM


That's the world's most expensive $2,000.00 TJ right there folks.


Fixed it for you
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title
Pages: [1] 2 3   Go Up
« previous next »