Calgary Jeep Association

« previous next »
Pages: [1] 2   Go Down

Author Topic: Wheel adapters?  (Read 5164 times)

0 Members and 6 Guests are viewing this topic.

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Wheel adapters?
« on: March 13, 2012, 08:48:20 AM »
The utility trailer my dad built 50 yrs ago has a bolt pattern that's not 5 on 4.5 like the ZJ, it's like 5 on 5.5 or something weird.  Is there such a thing as a spacer/adapter I could use so I can run the 'spare' Jeep wheels on the trailer?
Logged

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: Wheel adapters?
« Reply #1 on: March 13, 2012, 08:56:18 AM »
I have seen them online before Rob.  You will need to use 2" spacer/adapters though so that the trailer axle hub does not interfere with the wheel.
Logged
04 TJ Rubi

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Wheel adapters?
« Reply #2 on: March 13, 2012, 08:59:44 AM »
Yeah thanks Kev ;).  Been looking online.  Just thought someone here has had some experience with this before.  To run the old stock ZJ wheels gunna need to space em out anyway.  Thought about getting different hubs too but would still need to have spacers to deal with backspacing ???.
Logged

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: Wheel adapters?
« Reply #3 on: March 13, 2012, 10:59:31 AM »
Spidertrax has the adapters that will also space the out
Logged

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Wheel adapters?
« Reply #4 on: March 13, 2012, 12:47:47 PM »
Quote from: WhiteOut on March 13, 2012, 10:59:31 AM
Spidertrax has the adapters that will also space the out

Yeah gotta go measure the bolt pattern on the trailer again.....can't remember.  Trying to source some locally.  Phoning around once I have the measurement.  Any suggestions for someone that'll have inventory?
Logged

Offline jkrubi

  • Budget Lift
  • Posts: 262
Re: Wheel adapters?
« Reply #5 on: March 13, 2012, 05:49:24 PM »
See what adpters are worth and compair it to the cost of a new axle from princess auto. I picked my axle up when it went on sale for 100. As well on the plus side the bolt pattern is 5-4.5  so the jeep rims will fit with no problems.
Logged

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: Wheel adapters?
« Reply #6 on: March 13, 2012, 06:18:35 PM »

I've got 2 spacers(NIB) that are 5.5 to 5.4 that will allow you to run your spare Jeep wheels Rob.
Logged
Lockers
Cuz ya can't kick arse with only one leg

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Wheel adapters?
« Reply #7 on: March 13, 2012, 07:01:43 PM »
Rob, do yourself a big favour and just replace the axle.

I bought a brand new 3,500lb axle with 5 on 4.5 bolt pattern built to my specs complete with new lug nuts and U-bolts from Standens for the grand total of $197.00 including GST.
I phoned the order in one morning at 7:00 and an they called me the following morning at 7:30 advising it was ready to pick up. It took me an hour to swap it and that including painting the axle.
Oh yeah, the new axle was equipped with E-Z Lube hubs for easy servicing.
You can order it with a wider WMS to WMS to accommodate the the additional backspacing of the typical Jeep rims.

I don't know what the adaptors are worth but I'd think at least 50 bucks a piece so your half way there.

Vince
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline esi

  • That CB Yapper
  • Posts: 633
Re: Wheel adapters?
« Reply #8 on: March 13, 2012, 09:00:49 PM »
If you don't decide to replace the axle, Canadian Wheel has adapters in stock usually.
Logged
Formerly of Boots & Boost Inc
Back farming and fabricating again.

Offline specialk

  • CJA Executive
  • Talks waaay too much!
  • Posts: 3176
Re: Wheel adapters?
« Reply #9 on: March 13, 2012, 09:20:21 PM »
X2 - what Vinman said...   I wish I had listened to that advise when I was building my trailer
Logged
04 TJ Rubi

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: Wheel adapters?
« Reply #10 on: March 13, 2012, 10:05:58 PM »
Quote from: specialk on March 13, 2012, 09:20:21 PM
X2 - what Vinman said...   I wish I had listened to that advise when I was building my trailer

Now where would the fun be in that?

You wished that you had listened to advice. I wish that I had been in there that weekend.  ;D
Logged
Quote from: TL-Iguana on December 08, 2011, 09:55:33 PM
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Wheel adapters?
« Reply #11 on: March 14, 2012, 08:23:29 AM »
Yeah thanks guys but I went through that whole axle thing last year.  Tried the PA axle but dimensions were all wrong so had one built at Standen's for close to the same money but not just a 1200 lb axle but a 3500 lb axle with both over and under spring perches.  Thing is, I had them match the hubs to the wheels I already had for the trailer, therefore track width and bolt pattern are what they are.  Now in hindsight....... ::)

Anyways, looks like Spidertrax and Roughcountry have the adapters.  Just gotta get em now.  Hope to find some on a shelf somewhere in Calgary ;D.
Logged

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Wheel adapters?
« Reply #12 on: March 14, 2012, 08:59:02 AM »
Quote from: tubby on March 13, 2012, 06:18:35 PM
I've got 2 spacers(NIB) that are 5.5 to 5.4 that will allow you to run your spare Jeep wheels Rob.

Thanks Tubster!!!  I'll measure em tonight ;)
Logged

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Wheel adapters?
« Reply #13 on: May 14, 2012, 09:39:12 AM »
Quote from: tubby on March 13, 2012, 06:18:35 PM
I've got 2 spacers(NIB) that are 5.5 to 5.4 that will allow you to run your spare Jeep wheels Rob.

Noel!! Ya still have these?  If so I'll take em ;D
Logged

Offline tubby

  • Talks waaay too much!
  • Posts: 1349
  • Life's too short for a fulltime job
Re: Wheel adapters?
« Reply #14 on: May 14, 2012, 10:29:35 AM »
Quote from: NUXJR on May 14, 2012, 09:39:12 AM
Noel!! Ya still have these?  If so I'll take em ;D

Psssst!

There's this function called " PM's" aka " private messages "

Just sayin...
Logged
Lockers
Cuz ya can't kick arse with only one leg
Pages: [1] 2   Go Up
« previous next »