Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: JKS DISCO ISSUE  (Read 1674 times)

0 Members and 2 Guests are viewing this topic.

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
JKS DISCO ISSUE
« on: May 03, 2012, 10:14:15 PM »
So I've had the JKS Discos on my TJ for about 6 months and now that I have my lift kit on I need to extend them so that the sway bar is at 10*.  However, when I took them off do so, they wouldn't budge...  I soaked them in liquid wrench, but still nothing.  Has anyone had this issue, or have some hints on how loosen them up?
Thanks
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: JKS DISCO ISSUE
« Reply #1 on: May 03, 2012, 11:13:33 PM »
what do you mean? like the jam nut is stuck or you simply can't thread it at all to lengthen it? I've been running mine just over a year, and mine are great, can spin them by hand.

did you try this?
[spoiler][/spoiler]
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: JKS DISCO ISSUE
« Reply #2 on: May 03, 2012, 11:33:46 PM »
Jam nut spun, but can't thread to lengthen...without something to clamp the little suckers to it aint easy getting a good grip...any suggestions...
Also do you park the tj inside? Mines only been in a garage when being worked on, possible that the discos are more weathered and maybe even rusted... :-\
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline LEMON-AID JAY

  • That CB Yapper
  • Posts: 907
  • Bad a$$ zj owner
Re: JKS DISCO ISSUE
« Reply #3 on: May 03, 2012, 11:46:43 PM »
Bring them by the shop if you have time  and I will break them lose for you.
Logged
E-mortal customs
Www.e-mortalcustoms.com
3-2808 Ogden road s.e.
E-mail. [email protected]
Phone 403-265-6669
E-mail @ [email protected]
for all your 4x4 needs


www.piratesof4x4.com

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: JKS DISCO ISSUE
« Reply #4 on: May 04, 2012, 12:05:14 AM »
Thanks Jay, what time you around till tommorrow? As I would need to come after work.
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: JKS DISCO ISSUE
« Reply #5 on: May 05, 2012, 11:09:14 AM »
10* is only the correct angle for STOCK. The correct answer is 0* (parallel with the ground) when the suspension in the middle of it's travel. I'll text you about using my strong arm (well, maybe I'll use my left just to be different) to spin your QD.
Logged

Offline FirstTimer

  • That CB Yapper
  • Posts: 717
  • Gettin there!
Re: JKS DISCO ISSUE
« Reply #6 on: May 05, 2012, 02:56:00 PM »
So what is the correct angle for a 3" lift?
Logged
02' Black TJ Apex on 33s, 2.5"  OME HD lift, Currie JJ CA on all four corners, 4:10 axles, Husky-Liner Rear Swing-Away Bumper and Bushwackers Flat Flares.

Offline Rubi03 jef

  • Talks waaay too much!
  • Posts: 1918
  • she never understands
Re: JKS DISCO ISSUE
« Reply #7 on: May 05, 2012, 04:32:52 PM »
remove it all together ..  sway brs are over rated    ;D ;D ;D ;D ;D
Logged
04 rubicon <4'' X series RC lift, 1.25'' RC body lift, 1'' RC MML, CV rear drive shaft,  Stubby front bumper, CB,35 MTZ" ,Hi Lifter 54'',LED tail lights , flat fenders, LED front Flasher, half doors, Light force spots, and CDN M101 custom Military trailer

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: JKS DISCO ISSUE
« Reply #8 on: May 05, 2012, 07:13:14 PM »
Quote from: FirstTimer on May 05, 2012, 02:56:00 PM
So what is the correct angle for a 3" lift?

Measure your up and down travel, jack your jeep until you are in the middle of it's travel, set sway bar parallel to the ground.
Logged
Pages: [1]   Go Up
« previous next »