Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: Saggy XJ Doors.  (Read 2798 times)

0 Members and 2 Guests are viewing this topic.

Offline Aspirated

  • Budget Lift
  • Posts: 169
Saggy XJ Doors.
« on: September 06, 2012, 07:07:30 AM »
I have a 1998 XJ 2DR. The door hinges are worn. Far as i can see its a body shop repair as far as the bond/welding go.  Is there another repair?

Any recommendations are greatly appreciated.

Thanks
Mickey.
Logged
What would i spend my money on if it wern't for JEEP's
1998 XJ
2008 KK

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Saggy XJ Doors.
« Reply #1 on: September 06, 2012, 09:30:22 AM »
Usually you can fix that with new door pins... I have the same issue on my XJ but yet to tackle it.
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Moogs

  • Baby Wheeler
  • Posts: 67
Re: Saggy XJ Doors.
« Reply #2 on: September 06, 2012, 11:23:17 AM »
If its the actual weld to the body letting go you can weld it, or bolt it. I did the bolt through method and have had zero issues.

Bolt through thread link:

http://www.xjtalk.com/showthread.php?t=3021
Logged

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Saggy XJ Doors.
« Reply #3 on: September 06, 2012, 11:33:59 AM »
Quote from: dubbleJs on September 06, 2012, 09:30:22 AM
Usually you can fix that with new door pins... I have the same issue on my XJ but yet to tackle it.

I fixed mine with grand cherokee hinge brass bushing. Auto Value has them... it's about $20-$30...

It i sa royal pain the arse to get the old bushings out.

option: Duke of Hazard it out.. weld your doors and jump in the window  ;)
Logged

Offline Aspirated

  • Budget Lift
  • Posts: 169
Re: Saggy XJ Doors.
« Reply #4 on: September 06, 2012, 11:55:41 AM »
To clarify, its the hinge pivot itself thats worn. I was hoping there would be a replcement pivot or bushing available.
Logged
What would i spend my money on if it wern't for JEEP's
1998 XJ
2008 KK

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Saggy XJ Doors.
« Reply #5 on: September 06, 2012, 11:58:31 AM »
Quote from: Aspirated on September 06, 2012, 11:55:41 AM
To clarify, its the hinge pivot itself thats worn. I was hoping there would be a replcement pivot or bushing available.

If I understand well....

It is the bushing then... it doesn't look like there are any there but ...They are there


The pins slide in the "pivot hinge"  there is a bushing there.
« Last Edit: September 06, 2012, 12:00:02 PM by SwampSinger »
Logged

Offline Aspirated

  • Budget Lift
  • Posts: 169
Re: Saggy XJ Doors.
« Reply #6 on: September 06, 2012, 01:47:21 PM »
the bottom of the pin is worn in the hinge. allows about 1.5' of play  up and down in the door.
Logged
What would i spend my money on if it wern't for JEEP's
1998 XJ
2008 KK

Offline 89cherokee

  • Baby Wheeler
  • Posts: 90
Re: Saggy XJ Doors.
« Reply #7 on: September 06, 2012, 05:28:39 PM »
Quote from: Aspirated on September 06, 2012, 01:47:21 PM
the bottom of the pin is worn in the hinge. allows about 1.5' of play  up and down in the door.
1.5 feet of play damn thats alot, gotta be something other than the bushings.
Logged

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: Saggy XJ Doors.
« Reply #8 on: September 06, 2012, 06:16:10 PM »
Quote from: SwampSinger on September 06, 2012, 11:33:59 AM
I fixed mine with grand cherokee hinge brass bushing. Auto Value has them... it's about $20-$30...

It i sa royal pain the arse to get the old bushings out.

option: Duke of Hazard it out.. weld your doors and jump in the window  ;)

Haha...hmmm that's one idea! Or just take the doors off like the cool kids are doing these days... :P

Good to know about the ZJ bushings, are the XJ ones not brass?


Quote from: 89cherokee on September 06, 2012, 05:28:39 PM
1.5 feet of play damn thats alot, gotta be something other than the bushings.

Hahaa...I thought the same thing but was gonna let it slide
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline SwampSinger

  • CJA Members
  • Talks waaay too much!
  • Posts: 6172
  • Baconator
    • mmmmm-bacon
Re: Saggy XJ Doors.
« Reply #9 on: September 06, 2012, 07:38:53 PM »
That's all they had at the store on Bannister at the time..... they fit on the XJ. I think it's the same application (might want to double check)
Logged
Pages: [1]   Go Up
« previous next »