Calgary Jeep Association

Author Topic: Just ordered a new 2013 JKU Rubicon  (Read 3461 times)

0 Members and 1 Guest are viewing this topic.

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Just ordered a new 2013 JKU Rubicon
« on: October 13, 2012, 05:17:55 PM »
Hi all:

I just ordered (Today) a new 2013 JKU Ribicon.

  • JKU Rubicon
  • Automatic
  • Deep Cherry Red
  • Body Colour Hard top and Fender Flares
  • Max Tow Package
  • Remote Start System
  • Air Conditioning w/Auto Temp Control

Delivery in 6 - 12 weeks.  Hopefully here by Christmas.
(Just in time for Snow Season)


Anthony
« Last Edit: November 06, 2012, 02:01:48 PM by apeman »
Anthony Parkinson
2013 JKU Rubicon

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Just ordered a new 2013 JKU Rubicon
« Reply #1 on: October 13, 2012, 05:54:52 PM »
Congrats, you'll love it!


Sent from my iPhone using Tapatalk
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline Moezer

  • That CB Yapper
  • Posts: 609
Re: Just ordered a new 2013 JKU Rubicon
« Reply #2 on: October 13, 2012, 06:44:49 PM »
best X max gift ever  ;D have fun with it

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Re: Just ordered a new 2013 JKU Rubicon
« Reply #3 on: October 14, 2012, 06:56:10 AM »
One question.  The dealership offered a list of "Protection options" including the usual undercoating and paint protection. 

They also are offering something I have never heard of before, a "Corrosion Control Module".  It is some sort of high tech device that purports to control rust with "pusles of low voltage electric current".

Anyone ever heard of this?  Does it work?  Is it worth the $700.00 they are asking?

Anthony
Anthony Parkinson
2013 JKU Rubicon

Offline w squared

  • Talks waaay too much!
  • Posts: 3400
  • Keamy Hungry!
Re: Just ordered a new 2013 JKU Rubicon
« Reply #4 on: October 14, 2012, 07:22:25 AM »
Only if you use it as a paperweight to hold down stack of $20 bills during a windstorm.
I followed a rainbow out to a garage and found a leprichaun. The rainbow ended in a potted cactus on his porch, but there was no gold :(

Offline AstraX

  • That CB Yapper
  • Posts: 863
Re: Just ordered a new 2013 JKU Rubicon
« Reply #5 on: October 14, 2012, 08:25:48 AM »
One question.  The dealership offered a list of "Protection options" including the usual undercoating and paint protection. 

They also are offering something I have never heard of before, a "Corrosion Control Module".  It is some sort of high tech device that purports to control rust with "pusles of low voltage electric current".

Anyone ever heard of this?  Does it work?  Is it worth the $700.00 they are asking?

Anthony

I got all of this when I bought my 2010.  My opinion is that if you plan on wheeling the Jeep then the undercoating and paint protection aren't really worth it.  If it is going to be mostly on pavement then, sure why not?  For the Corrosion Module, mine is only 2 years old so it is too early to tell.

Offline Jrama

  • That CB Yapper
  • Posts: 923
Re: Just ordered a new 2013 JKU Rubicon
« Reply #6 on: October 14, 2012, 10:30:09 AM »
Wouldn't surprise me if you could get the corrosion module installed after market cheaper then what the dealer is offering. I have one on our ram 2500 doesn't seem to do much....but I'm not sure if its even still working.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Just ordered a new 2013 JKU Rubicon
« Reply #7 on: October 14, 2012, 11:20:24 AM »
Those modules sell for less then half that price. Install isn't hard either. Most of them have the red led on them and if its lit up its on. I've seen an old yj with one that had next to no rust. But rust isn't a huge deal in Alberta compared to eastern areas. If you do get one aftermarket get it sooner then later.The paint and undercoating are up to you. 3M is nice too but again not cheap.
Did you buy any extra warranty or service packages with it?
What are your plans for the jeep?
YJ=Y’all Jealous

Offline scott slade

  • UberWheeler
  • Posts: 383
  • Amboy... Route 66
Re: Just ordered a new 2013 JKU Rubicon
« Reply #8 on: October 14, 2012, 12:28:01 PM »
Canadian Tire sells a anti-rust module.  With more salt based products used on the roads lately, it might be an option. But $700.00  wow...
2005 LJ, Six Speed,
 16" Moab Rims
HD Broadcast Video Production Unit

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Re: Just ordered a new 2013 JKU Rubicon
« Reply #9 on: November 06, 2012, 11:05:50 AM »
Anyone know if the 2013 Rubicon is still using the BF Goodrich Mud-Terrain T/A KM?
Anthony Parkinson
2013 JKU Rubicon

Offline TJdude

  • Stocker
  • Posts: 1
Re: Just ordered a new 2013 JKU Rubicon
« Reply #10 on: November 07, 2012, 07:02:25 PM »
Congratulation on the new ride. As part of my job I sell and install protection packages for new vehicles, I do not for for any car dealer but for a private shop called the auto protectors. The rust module you are talking about is just a gimmick.

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: Just ordered a new 2013 JKU Rubicon
« Reply #11 on: November 12, 2012, 10:37:09 AM »
Look carefully at the rust/corrosion protection package and what it doesn't cover. I bought a used 2008 Dakota recently that had this package purchased by the original owner. The package was transferred to me when I bought the truck. It has some rust on the hood from rock chips and some bubbling of the paint on the rear bumper. Neither is covered by this package.
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Re: Just ordered a new 2013 JKU Rubicon
« Reply #12 on: December 14, 2012, 10:24:43 AM »
Anthony Parkinson
2013 JKU Rubicon

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Re: Just ordered a new 2013 JKU Rubicon
« Reply #13 on: January 23, 2013, 01:02:53 PM »
Now that I have had it for a month or so, next question:

What would people recommend for a winch?

Anthony Parkinson
2013 JKU Rubicon

Offline WhiteOut

  • Talks waaay too much!
  • Posts: 1885
Re: Just ordered a new 2013 JKU Rubicon
« Reply #14 on: January 23, 2013, 02:46:39 PM »
Minimum 8,000lb. 9,000 or 9,500 for a JK is probably best, Warn with a synthetic line is what I would recommend.