Calgary Jeep Association

Author Topic: Looking for a boilt key!  (Read 2103 times)

0 Members and 2 Guests are viewing this topic.

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
Looking for a boilt key!
« on: October 26, 2012, 04:39:35 PM »
Stupid me left the boilt key on the boilt after switching over to my fun tires for the snow! But now can't get it off, looking for someone that would hopefully have the same style as mine! I need a key with 3 flat sides and one with a point on it. If you this you many have it I can send a pitcher to compare( as I do not know how to post one).

Box of beer comes with the great help!

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #1 on: October 26, 2012, 06:43:55 PM »
I'll pm you my email and post a pic for ya, I have no clue what your talking about, pic will help.

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #2 on: October 26, 2012, 07:22:29 PM »

Offline vantagetes

  • That CB Yapper
  • Posts: 947
  • Edmonton Trail Rated
Re: Looking for a boilt key!
« Reply #3 on: October 26, 2012, 09:22:48 PM »
Do that thing I told you with the socket Mark.

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
Re: Looking for a boilt key!
« Reply #4 on: October 26, 2012, 09:24:25 PM »
Do that thing I told you with the socket Mark.

How do it when they are on the tire

Offline Timok

  • Winch Wench
  • Posts: 28
Re: Looking for a boilt key!
« Reply #5 on: October 27, 2012, 03:19:43 PM »
B.F.H.

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
Re: Looking for a boilt key!
« Reply #6 on: October 27, 2012, 03:27:37 PM »

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #7 on: October 27, 2012, 03:34:14 PM »
Belligerent frisky hermaphrodite

Or

Big fuggin hammer

Offline 03Jeeper

  • Budget Lift
  • Posts: 266
Re: Looking for a boilt key!
« Reply #8 on: October 27, 2012, 04:51:07 PM »
Belligerent frisky hermaphrodite

Lol!!

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: Looking for a boilt key!
« Reply #9 on: November 05, 2012, 05:24:40 PM »
You can buy removers for these at a parts store or use a hammer and chisel (not fun).

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #10 on: November 05, 2012, 05:28:24 PM »
Or pound a slightly smaller socket on with a hermaphrodite, cheaper then buying the key set and less annoying as the chisel method.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: Re: Looking for a boilt key!
« Reply #11 on: November 05, 2012, 05:30:56 PM »
Or pound a slightly smaller socket on with a hermaphrodite, cheaper then buying the key set and less annoying as the chisel method.

The "remover" is a special socket that you twist on, pounding a smaller socket on is difficult, hence the hammer and chisel.

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #12 on: November 05, 2012, 05:42:08 PM »
Removers cost a 100 bucks a set. Hammer and chisel takes for fuggin ever. Socks are cheap and if you have a man sized hammer and man sized arms, will take ya 5 minutes. Done.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: Re: Looking for a boilt key!
« Reply #13 on: November 05, 2012, 06:40:31 PM »
Removers cost a 100 bucks a set. Hammer and chisel takes for fuggin ever. Socks are cheap and if you have a man sized hammer and man sized arms, will take ya 5 minutes. Done.

The removers are $29/set and my snap-on sockets are about $40/each...so no pounding for me.   The remover takes takes about 15 sec...no hammering required.

Offline binare

  • That CB Yapper
  • Posts: 771
Re: Re: Looking for a boilt key!
« Reply #14 on: November 05, 2012, 07:53:44 PM »
That's great, Im happy for you that you've found a method that works for you. I'm guessing the OP has not found a method yet, so I offer my advice as one that works for me and others I see, is that okay?