Calgary Jeep Association

Author Topic: May need a really heavy bumper after this..  (Read 2501 times)

0 Members and 1 Guest are viewing this topic.

Offline KorzaXJ

  • Winch Wench
  • Posts: 33
    • Korza Design
May need a really heavy bumper after this..
« on: May 27, 2014, 01:11:42 PM »
I have pretty much ZERO articulation. I could remove the front sway bar, that should help a bit, but I flex like a neon haha

https://www.youtube.com/watch?v=aqVdBnC3WOA&feature=youtu.be

Offline cLAY

  • Talks waaay too much!
  • Posts: 2377
Re: May need a really heavy bumper after this..
« Reply #1 on: May 27, 2014, 03:27:33 PM »
Ouch, that is stiff.  What springs do you have?
..

'93 ZJ, 5.2L, lifted/locked/36s..<gone>
'98 5.9er 4.10s,locked,LA,WJ knuckles

Offline Dingleberry

  • UberWheeler
  • Posts: 450
Re: May need a really heavy bumper after this..
« Reply #2 on: May 27, 2014, 03:31:57 PM »
Definitely disconnecting the front sway bar would help!
Also, if you have a rear sway bar, remove it completely.

And whatever you do, don't do this:
 http://www.youtube.com/watch?v=lDlQPnyJ42s

Offline XJHERO

  • Talks waaay too much!
  • Posts: 2041
  • Soberphobic
Re: May need a really heavy bumper after this..
« Reply #3 on: May 27, 2014, 04:20:43 PM »
And don't forget to put it in park!
Like ivry soap....pure as frack
DD
Get at me Wolf

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re:
« Reply #4 on: May 27, 2014, 04:36:55 PM »
That's most certainly a sway bar  in the front. Pop that sucker and waaay different. The rear?? Do xjs have a swaybar in the rear??

Sent from my Nexus 5 using Tapatalk

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: May need a really heavy bumper after this..
« Reply #5 on: May 27, 2014, 07:09:05 PM »
Yes there is a rear swar bar on an xj. Known issue with a lift and rear sway at flex is end of sway bar pokes out the sidewall of your tire.

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: May need a really heavy bumper after this..
« Reply #6 on: May 27, 2014, 07:33:05 PM »
Dang! That is mighty tippy... better get yourself some disconnects  ;)
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline KorzaXJ

  • Winch Wench
  • Posts: 33
    • Korza Design
Re: May need a really heavy bumper after this..
« Reply #7 on: May 27, 2014, 08:11:02 PM »
Yes there is a rear swar bar on an xj. Known issue with a lift and rear sway at flex is end of sway bar pokes out the sidewall of your tire.

That happened to me after hours of working on it. I just gave up threw the spare on and got new tires the next thursday. I need swaybar disconnects pretty badly

Offline whitefang

  • Baby Wheeler
  • Posts: 51
Re: May need a really heavy bumper after this..
« Reply #8 on: May 27, 2014, 08:58:07 PM »
x2

remove rear sway bar completely, 31 inch tires stuff well in the rear fenders
1995 xj Richmond Lock-Right front and back 2" lift 31x10.5 BFG KM 8500 superwinch

Offline KorzaXJ

  • Winch Wench
  • Posts: 33
    • Korza Design
Re: May need a really heavy bumper after this..
« Reply #9 on: May 28, 2014, 08:09:00 AM »
there is no rear sway bar, I (at first) disconnected it, then something happened and it ended up exploding my rear tire, and snapping in two



also when i say something happened i meant, "something happened" haha. typical little whoops moment