Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: LS 2 5.3 swap in progress  (Read 2079 times)

0 Members and 2 Guests are viewing this topic.

Offline trackerthrasher

  • UberWheeler
  • Posts: 301
  • 74' CJ 5
LS 2 5.3 swap in progress
« on: July 03, 2017, 11:49:57 AM »
I am looking for someone who has done this and has some experience with the wiring. I am looking to keep the jeep ECM to run the gauges and the chev ECM to run the engine. Has anyone got some detailed info on jow to do this or know where I can get it? Thanks for any and all input!
PS: I have talked to Novak and they are 12 weeks after receipt of my harness. I'm hoping for some new info and local talent. 
Logged
The one thing that unites all human beings, regardless of age, gender, religion, economic status or ethnic background, is that, deep down inside, we ALL believe that we are above average drivers.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: LS 2 5.3 swap in progress
« Reply #1 on: July 05, 2017, 07:33:52 AM »
PS: I have talked to Novak and they are 12 weeks after receipt of my harness.

What does this statement mean??
Logged

Offline trackerthrasher

  • UberWheeler
  • Posts: 301
  • 74' CJ 5
Re: LS 2 5.3 swap in progress
« Reply #2 on: July 05, 2017, 08:11:13 AM »
It means Novak has a back log of 12 weeks to build a compatible harness for the swap.
Logged
The one thing that unites all human beings, regardless of age, gender, religion, economic status or ethnic background, is that, deep down inside, we ALL believe that we are above average drivers.

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: LS 2 5.3 swap in progress
« Reply #3 on: July 05, 2017, 04:48:13 PM »
Quote from: trackerthrasher on July 05, 2017, 08:11:13 AM
It means Novak has a back log of 12 weeks to build a compatible harness for the swap.
Ahh...I get it.   Novak are the experts on this stuff, been to their place and have met the guy who does the harness.  Locally, the Broken Axle guys put a small block in a jeep a couple of years ago with excellent results.
« Last Edit: July 06, 2017, 09:21:18 AM by rws »
Logged

Offline LukeDuke

  • Budget Lift
  • Posts: 159
Re: LS 2 5.3 swap in progress
« Reply #4 on: July 06, 2017, 11:12:18 AM »
Are you keeping the jeep Trans?  What Jeep?  Are you keeping the 5.3 factory fuel injection or going after market or carb? Has the  Gm harnesss been gone through yet?  Do you still have the Jeep harness and PCM?
Logged
1967 C101 - in 1,000,000 pieces
1973 C104 - in 2,000,000 pieces

RDJP President
http://www.reddeerjeep.com/

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: LS 2 5.3 swap in progress
« Reply #5 on: July 08, 2017, 05:02:02 AM »
Rick at E-Mortal has done this swap.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline rws

  • CJA Members
  • Talks waaay too much!
  • Posts: 1543
  • Stump Grinder
Re: LS 2 5.3 swap in progress
« Reply #6 on: July 08, 2017, 07:56:05 AM »
Quote from: Kanueh on July 08, 2017, 05:02:02 AM
Rick at E-Mortal has done this swap.
Rick's specialty is "insane" race vehicles!  Definitely go have a chat with him.
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
LS 2 5.3 swap in progress
« Reply #7 on: July 08, 2017, 08:45:05 AM »
It was a while ago but I think Rick said if they had to do it again, he would ditch the jeep computer and dash and replace everything. I guess even with the new harness getting everything to play together was a huge pain.
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers
Pages: [1]   Go Up
« previous next »