Calgary Jeep Association

« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: Graveltravels tinworm CJ 7  (Read 8265 times)

0 Members and 1 Guest are viewing this topic.

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Graveltravels tinworm CJ 7
« on: April 09, 2018, 10:16:00 PM »
Hey guys. Lurked around here on and off. Think my last build post was my flaming jku. That thing was great, till it tried to kill me. Immortal reminded me that CJA still exists, and that I should really get my hind end in gear and apply for membership. Now to actually make a meeting.

Anyways, after the jku fried and died, I decided to build up my CJ 7. And use it. And abuse it. To the point where it's now in full on frame off fix. Not restore. Gonna wheel this thing. Just need it semi reliable, and a little more capable. So, some pics.

 

All this took its tol on her.



I found a donor motor, and other parts and pieces, this was a 350sbc. Downfall to this is the TH350 paired with an NP205. Not much for low gearing. I'll be looking for a 700R4, and mate up one of my D300's at some point.


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #1 on: April 09, 2018, 10:17:42 PM »


Stripped her down, and of course, have a couple body mounts that need attention.




Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #2 on: April 09, 2018, 10:18:17 PM »


Have a nice little prep table for the body


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #3 on: April 09, 2018, 10:19:00 PM »


Stripping the original on its own bench.


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #4 on: April 09, 2018, 10:21:19 PM »








Removed the YJ windshield, and tailgate. Going to use all CJ stuff. Have to graft in the CJ cowl, in place of the YJ


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #5 on: April 09, 2018, 10:22:14 PM »


And had to play around with some paint


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #6 on: April 09, 2018, 10:22:30 PM »
I'll keep this updated. Cheers.


Sent from my iPhone using Tapatalk
Logged

Offline morerpmfred

  • Talks waaay too much!
  • Posts: 1604
Re: Graveltravels tinworm CJ 7
« Reply #7 on: April 10, 2018, 10:02:20 AM »
Looks good Mike. Yj tailgate? Cj is nicer.
Logged

Offline Kanueh

  • Budget Lift
  • Posts: 177
Re: Graveltravels tinworm CJ 7
« Reply #8 on: April 10, 2018, 04:35:25 PM »
Coming along nice!
Logged
2008 JKU Rubicon
3" BDS Lift / Kingone 9.5 Winch / 1.5" Spidertrax Wheel Spacers / Custom Front Drive Shaft
EVO Sleeves, Outer axle seals, Gussets, Control Arm Skids / Poison Spyder EVAP Skid
Superchips FlashPaq / Spal Waterproof Radiator Fan / Univers

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #9 on: April 10, 2018, 07:28:48 PM »


Little bit of work today.


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #10 on: April 10, 2018, 07:29:19 PM »
Quote from: morerpmfred on April 10, 2018, 10:02:20 AM
Looks good Mike. Yj tailgate? Cj is nicer.


You bet Andy.


Sent from my iPhone using Tapatalk
Logged

Offline GONZO

  • Stocker
  • Posts: 3
Re: Graveltravels tinworm CJ 7
« Reply #11 on: April 13, 2018, 12:07:57 AM »
Awesome work bud!

Sent from my SM-G930W8 using Tapatalk

Logged

Offline ornamental

  • UberWheeler
  • Posts: 460
    • http://www.webshots/users/yeungstreet
Re: Graveltravels tinworm CJ 7
« Reply #12 on: April 13, 2018, 10:38:13 AM »
Nice project!   Do you need some CJ parts?  I have hood,  half doors soft uppers, mirrors etc...
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #13 on: April 18, 2018, 04:13:00 PM »
Quote from: ornamental on April 13, 2018, 10:38:13 AM
Nice project!   Do you need some CJ parts?  I have hood,  half doors soft uppers, mirrors etc...


Man, let me know what you have. I'm always looking. The way I drive, I tend to wreck things!!


Sent from my iPhone using Tapatalk
Logged

Offline Graveltravels

  • Budget Lift
  • Posts: 119
Re: Graveltravels tinworm CJ 7
« Reply #14 on: April 18, 2018, 04:14:47 PM »







Sent from my iPhone using Tapatalk
Logged
Pages: [1] 2 3 4   Go Up
« previous next »