Calgary Jeep Association

« previous next »
Pages: [1] 2   Go Down

Author Topic: Best rust/penetrating oil?  (Read 4569 times)

0 Members and 3 Guests are viewing this topic.

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Best rust/penetrating oil?
« on: April 17, 2012, 09:20:19 AM »
What's the best one?? Want to adjust steering stops but crazy rust, also going to heat the crap out of them. Any suggestions? :)
Logged

Offline NUXJR

  • That CB Yapper
  • Posts: 835
Re: Best rust/penetrating oil?
« Reply #1 on: April 17, 2012, 09:34:12 AM »
I've been using Release-All for a long time.  Seems to work quite well and it's more bio friendly too
Logged

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Best rust/penetrating oil?
« Reply #2 on: April 17, 2012, 11:01:26 AM »
50/50 mix of auto tranny fluid and acetone was rated better than any off the shelf product.

Vince
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline Jrama

  • That CB Yapper
  • Posts: 923
Re: Best rust/penetrating oil?
« Reply #3 on: April 17, 2012, 11:02:39 AM »
^^I have never known a penetrating oil to ever really solve issues, they just make the doable easier. Off the shelf PB blaster is my favorite but I'm definitely going to give the tranny fluid and acetone a try...luckily not a lot of rust or stuck bolts on my 04  ;D

I should add the most useless one i tried was liquid wrench, but its not like I have an objective method of proving which oils are better
« Last Edit: April 17, 2012, 11:08:38 AM by Jrama »
Logged

Offline IgniteTJ

  • Budget Lift
  • Posts: 154
Re: Best rust/penetrating oil?
« Reply #4 on: April 17, 2012, 11:06:11 AM »
I like sea foam or wurth products personally
Logged
1998 Dodge Ram Reg Cab Short Box, lift and 35's going on it over the winter along with 4:10's

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: Best rust/penetrating oil?
« Reply #5 on: April 17, 2012, 11:15:11 AM »
for off the shelf products, I've had good luck with both PB blaster and Liquid Wrench.

I actually prefer Liquid Wrench since it's non toxic/wont catch fire, so you can heat and spray at the same time all you want.
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: Best rust/penetrating oil?
« Reply #6 on: April 17, 2012, 01:04:15 PM »
Quote from: Vinman on April 17, 2012, 11:01:26 AM
50/50 mix of auto tranny fluid and acetone was rated better than any off the shelf product.

Vince
I'm gonna try this as I have both. I'm assuming you just brush it on??
Logged

Offline Knox

  • That CB Yapper
  • Posts: 649
Re: Best rust/penetrating oil?
« Reply #7 on: April 17, 2012, 01:40:20 PM »
Quote from: BUKI on April 17, 2012, 01:04:15 PM
I'm gonna try this as I have both. I'm assuming you just brush it on??

old style squeeze ketchup bottle?  ;D
Logged
2003 TJ
"Your TJ has the aerodynamics of a brick"
"if you lose the stick, chances are you'll lose the jeep......"

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: Best rust/penetrating oil?
« Reply #8 on: April 17, 2012, 04:31:38 PM »
Quote from: BUKI on April 17, 2012, 01:04:15 PM
I'm gonna try this as I have both. I'm assuming you just brush it on??

I've never tried it but will mix it and use a refillable WD40 spray bottle to apply it.

Vince
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline LukeDuke

  • Budget Lift
  • Posts: 159
Re: Best rust/penetrating oil?
« Reply #9 on: April 17, 2012, 04:56:35 PM »
Heat it up with a torch. Take one of your wifes/girlfreinds/roommates fancy candles and melt it all over the threads. Spin out by hand.

We use this trick on rusted heavy equipment under caraige all the time.
Logged
1967 C101 - in 1,000,000 pieces
1973 C104 - in 2,000,000 pieces

RDJP President
http://www.reddeerjeep.com/

Offline Black Betty

  • UberWheeler
  • Posts: 453
Re: Best rust/penetrating oil?
« Reply #10 on: April 19, 2012, 10:12:16 PM »
Quote from: Knox on April 17, 2012, 11:15:11 AM
for off the shelf products, I've had good luck with both PB blaster and Liquid Wrench.

I actually prefer Liquid Wrench since it's non toxic/wont catch fire, so you can heat and spray at the same time all you want.

X2, both awesome products.
Logged
06 wk-soccer mom mobile aka Betty J
99 xj- Black Betty, 2" OME lift
94 yj- needs to be lifted aka Betty Rubble

Stupid hurts

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Best rust/penetrating oil?
« Reply #11 on: April 20, 2012, 11:03:17 AM »
WD 40 is the best one i've ever used.


i've never met a bolt i couldn't get out using WD 40........... 

Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline Black Betty

  • UberWheeler
  • Posts: 453
Re: Best rust/penetrating oil?
« Reply #12 on: April 20, 2012, 06:19:58 PM »
Quote from: JackstandJohnny on April 20, 2012, 11:03:17 AM
WD 40 is the best one i've ever used.


i've never met a bolt i couldn't get out using WD 40........... 



Hmm, I have not had such luck with good old wd.  Its actually Water Dispacement (trial #40).  But for cleaning up old metal it works great.
Logged
06 wk-soccer mom mobile aka Betty J
99 xj- Black Betty, 2" OME lift
94 yj- needs to be lifted aka Betty Rubble

Stupid hurts

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: Best rust/penetrating oil?
« Reply #13 on: April 21, 2012, 12:44:22 AM »
Quote from: Black Betty on April 20, 2012, 06:19:58 PM
Hmm, I have not had such luck with good old wd.  Its actually Water Dispacement (trial #40).  But for cleaning up old metal it works great.


i've heard many people have not had success with WD40. i've never had a problem with it.  i would like to attribute it to the qualities of said product, but its most likely due to my massive muscles, and ability to input such forces to said bolt via ratchet.


all though air tools are nice............................. ;) 

Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline BUKI

  • Talks waaay too much!
  • Posts: 1197
  • Project Fugly
Re: Best rust/penetrating oil?
« Reply #14 on: April 21, 2012, 11:06:08 AM »
No no. You just use your used car salesmen techniques to beat it into submission.  ;)
Logged
Pages: [1] 2   Go Up
« previous next »