Calgary Jeep Association

« previous next »
Pages: [1]   Go Down

Author Topic: jk sway bar disconnects, Yes or no?  (Read 2500 times)

0 Members and 3 Guests are viewing this topic.

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
jk sway bar disconnects, Yes or no?
« on: February 12, 2014, 10:28:46 PM »
Should I be adding a diy jk sway bar disconnects? I am a easy going wheeler with a stock jk and need the jk for a everyday driver as well. Looks easy to instal and upgrade too. Would like some feed back on stock jeeps with them!

Thanks
Logged

Offline JackstandJohnny

  • Talks waaay too much!
  • Posts: 4727
  • where Jeeps go to die
Re: jk sway bar disconnects, Yes or no?
« Reply #1 on: February 12, 2014, 10:40:01 PM »
just unbolt the stock one and push it out of the way.

been doing that for years.........
Logged
~ rescue green JKUR on 35s.  typical rubicon build

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
Re: jk sway bar disconnects, Yes or no?
« Reply #2 on: February 18, 2014, 08:00:33 PM »
Great I looked into it and say the jks are a easy install and user friendly thinking of those ones might work
Logged

Offline canthonyparkinson

  • Winch Wench
  • Posts: 37
Re: jk sway bar disconnects, Yes or no?
« Reply #3 on: February 19, 2014, 04:29:08 PM »
As the driver of a JKU Rubicon, I can tell you that I use the Sway Bar disconnect way more often than the lockers.  Go for it.
Logged
Anthony Parkinson
2013 JKU Rubicon

Offline johndeeretimex

  • Baby Wheeler
  • Posts: 91
Re: jk sway bar disconnects, Yes or no?
« Reply #4 on: February 28, 2014, 01:19:36 PM »
Well it took longer to finish my sub than it did to put the bars on! They work great just need a good way to keep it up wile it is free
Logged

Offline dubbleJs

  • Talks waaay too much!
  • Posts: 1330
Re: jk sway bar disconnects, Yes or no?
« Reply #5 on: February 28, 2014, 02:23:39 PM »
Not sure how its set up on a JK but we zip tie my brothers Jks disconnects up on his XJ through a hole in the frame rail. Use metal zip ties though as the plastic ones tend to break
Logged
'91 XJ - 3" procrap - cutout for 33" MT's  - More and more dents every run...Sold.
'98 XJ - Lifted, locked and lovin' it

Offline Vinman

  • CJA Executive
  • Talks waaay too much!
  • Posts: 2237
Re: jk sway bar disconnects, Yes or no?
« Reply #6 on: February 28, 2014, 04:21:14 PM »
Quote from: johndeeretimex on February 28, 2014, 01:19:36 PM
Well it took longer to finish my sub than it did to put the bars on! They work great just need a good way to keep it up wile it is free

Don't they come with storage pins you put on the frame like the TJ's?
Logged
/l ,[____],
 l---L -OlllllllO-
 ()_)-()_)-o-)_)

Quote from: Bnine link=topic=25904.msg162940#msg162940      date=1341881306
. 
 Resident prick is my job and it took me ten years to earn that title

Offline TL-Iguana

  • Talks waaay too much!
  • Posts: 1117
  • XJ - The Official TJ Rescue Vehicle
Re: jk sway bar disconnects, Yes or no?
« Reply #7 on: March 01, 2014, 01:26:26 AM »
Quote from: Vinman on February 28, 2014, 04:21:14 PM
Don't they come with storage pins you put on the frame like the TJ's?

Or a couple bolts put through the sheet metal work as well... Use a washer and a 2nd nut to hold it on.. But yes, should have come with pins.
Logged
I did a Google search for "hot trannies" but nothing came up about oil coolers  :o

Worrying too much about mpg with a Jeep is similar to worrying about your sister's virginity. An ok thing to be concerned about but...

'01 XJ on 35s, '11 Jk DD
Pages: [1]   Go Up
« previous next »