Calgary Jeep Association

Author Topic: Speedometer gear?  (Read 1349 times)

0 Members and 1 Guest are viewing this topic.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Speedometer gear?
« Reply #15 on: April 27, 2021, 03:28:40 PM »
Can you confirm your diff gear ratio?
YJ=Y’all Jealous

Offline Zooguy

  • Baby Wheeler
  • Posts: 55
  • 83 CJ7- AMC 360
Re: Speedometer gear?
« Reply #16 on: April 27, 2021, 03:57:28 PM »
Can you confirm your diff gear ratio?

I opened up the diffs a couple weeks ago. 4.10s

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
Re: Speedometer gear?
« Reply #17 on: April 27, 2021, 04:28:25 PM »
According to the graph on quadratec you need a 34 tooth gear.
YJ=Y’all Jealous

Offline Zooguy

  • Baby Wheeler
  • Posts: 55
  • 83 CJ7- AMC 360
Re: Speedometer gear?
« Reply #18 on: April 27, 2021, 04:56:19 PM »
According to the graph on quadratec you need a 34 tooth gear.

Ok thanks, I called 4wheelparts and they said 32 through western. One of the guys on this forum says it’s about 5km per one tooth, so he really recommend the 29 based on me having a 25 tooth now and my speedo is high by about 20-22 km.
If it is one tooth per 5 km a 34 tooth should make it 45km slower on the speedo. Which would take me down to 80km while doing a 100km on my phone.
Sounds like I might have to buy a few and try them out.

Offline hps4evr

  • Administrator
  • Talks waaay too much!
  • Posts: 2959
YJ=Y’all Jealous